Ok, I have all the materials to make a cutlass now, the one on this site designed by Zero. I was wondering if anyone has made one of these yet, and what kind of ranges they were getting. Sorry if this sounds obnoxious, but I really want to know what kind of ranges to expect before I build this thing. Zero, in the old, old, post you had about the cutlass, you said that you built something similar and got around 90' flat. Is that what I should be expecting from this gun?
~ompa
3 replies to this topic
#1
Posted 23 June 2004 - 05:45 PM
#2
Posted 23 June 2004 - 05:49 PM
You sould expect around the same range because the guns are similar. It all so dependes on how much P.S.I. you put in yours and how much Zero put in.
Die with honor...Fight with pride...
Aim toward your goals...Quicken your stride...
With great power comes great responsibility.
Aim toward your goals...Quicken your stride...
With great power comes great responsibility.
#3
Posted 23 June 2004 - 07:35 PM
60 PSI, 18" barrel, but much, much larger tank volume and better flow rates. If you want an absolute one-shot-wonder with the basic design, up the vinyl tubing size mucho. Something like 1/2" ID or larger. That's one large mistake I made in the writeup that... Well, I don't quite feel like fixing at this point.
Regrettably, the Hose Handle is rather dismantled, so I can't get any good range estimates at this time.
Regrettably, the Hose Handle is rather dismantled, so I can't get any good range estimates at this time.
Edited by Zero Talent, 23 June 2004 - 07:35 PM.
"'Revere me as hot! All others are not! THIS, I COMMAND!'"
- Death
- Death
#4
Posted 23 June 2004 - 07:50 PM
Eh, any guestimates? Like within 20 feet? And I'll make sure to use 1/2 or bigger vinyl tubing... Thanks for letting me know.
~ompa
~ompa
Edited by ompa, 23 June 2004 - 07:50 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users