Lost Firefly Screws
#1
Posted 05 January 2013 - 12:59 PM
#2
Posted 05 January 2013 - 01:11 PM
#3
Posted 05 January 2013 - 01:59 PM
#4
Posted 05 January 2013 - 02:51 PM
#5
Posted 05 January 2013 - 03:02 PM
#6
Posted 05 January 2013 - 04:35 PM
I think Ls screws are the same size.From my experience nerf only uses two types of screws... big head ones and small head ones. The big ones don't go in small screw holes because the head doesn't fit, but I think that the screw threads themselves are very similar in size. If you have nite finders laying around, consider minimizing them or removing the screws that hold the lasers. You can get around seven screws or so and with careful placement you can get a solid Firefly shell. Plus, buying screws is not very cheap.
Also, I know dtg screws have the same measurements as Ls screws...
If you have any screws laying around, chances are they fit.
Good luck.
Edited by Mully, 05 January 2013 - 04:36 PM.
#7
Posted 05 January 2013 - 06:45 PM
Edited by Modded Brain 115, 05 January 2013 - 06:46 PM.
(+'.'+) This is Bunny. Copy and paste bunny into your profile to help him gain world domination.
(")_(") (yes i found this on another profile)
#8
Posted 06 January 2013 - 02:27 AM
http://www.mcmaster....-screws/=kwvyoe
http://www.mcmaster....-screws/=kwvzqq
http://www.mcmaster....-screws/=kwvzwv
Mr. Trouble is never up to any good keep tabs on him by visiting HellionLabs.com
#9
Posted 06 January 2013 - 12:27 PM
#10
Posted 06 January 2013 - 01:26 PM
Kruger and Dunning (1999)
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users