6 replies to this topic

[evoion44]

First legitimate modification post. Woo hoo. Anyway, I kind of got curisous as to what my AT2K can be and do. So in the
spirit of that, i started to build. And the end result was a singled AT2K with a really cool looking stock, a scope, and a long barrel.
May I present to you, the AT2KLR (Airtech 2000 Loser Rifle). Apparently, the "S" word gets replaced by loser. So this is a Loser rifle. But it
gets some pretty decent ranges.

Assembled



Disassembled(No Barrel)


Yes, that is a quadshot pump grip. But I removed it, after I realized it sucked.
The stock is made of 1 inch PVC and its pretty flipping sturdy. I plan to paint it,
but I lack the supplies at the moment.


It gets consistent 100's, in terms of range, and has a high tendency to go
beyond that. By the way, the pump is plugged. I had to plug it so it wouldn't
lose air (obvious).

USER WAS WARNED FOR THIS POST

Edited by Zorn's Lemma, 24 September 2012 - 09:37 AM.

[Guitarzan]

dude if you removed all of the duct tape and used actual adhesive or mechanical fastening you could decrease the ghettoness by 100% and you would have a blaster that would be respectable

[evoion44]

dude if you removed all of the duct tape and used actual adhesive or mechanical fastening you could decrease the ghettoness by 100% and you would have a blaster that would be respectable

I know right! I didnt have enough epoxy putty to finish the job. None of my guns are respectable at all, trust me.

[Tangerle]

Wow! yea "Guitarzan" is right, that is pretty ghetto, but I love the way that stock looks. I have a question though, where did you get that e-tape? I've used it before (I got it from my uncle). Also how accurate is that scope?

[evoion44]

Wow! yea "Guitarzan" is right, that is pretty ghetto, but I love the way that stock looks. I have a question though, where did you get that e-tape? I've used it before (I got it from my uncle). Also how accurate is that scope?

I got the etape from home depot. I use so much of it because I'm afraid of it breaking easily.
I am a super noob, so I don't really know a lot. Next time I'll use adhesive instead of tape.

[Pause]

I think this should be in the Mods and PJ thread because this isn't really a write-up for it. Pretty cool blaster though.

[Carbon]

Where to begin....

First off, the easy part. This doesn't deserve it's own thread, as there's no writeup here, just a couple of pics and a short description. This is what the Mods and PJ thread is for.

Second: have you run around and, you know, nerfed with this thing? Aside from the fact that it looks like it'd fall apart if you breathed on it wrong, it's wholely impractical. Scopes are useless with nerf darts, and you have painfully low ROF (i.e. you'll get owned by the first guy you come across with a bog standard pumpsnap). In short: the filter exists for a reason, as the concept doesn't exist in nerf. Locked.

Edited by Carbon, 23 September 2012 - 11:27 PM.