3 replies to this topic

[poptartmastr]

im a fng to nerfheaven but i love some works here ok so i followed a mod guide for the longshot cs-6 to take out the air restrictor, but the base of the air restrictor that is needed by the plunger system to give clearance for the plunger to get into the hook. this is a common issue with people that try modding this monster of a air restrictor, so i was wondering if anyone knows how to create the outside of it (doesn't need to be pretty, just working) thank you for reading

USER WAS WARNED FOR THIS POST

This post is in heavy violation of the Code of Conduct. Can you figure out why?

Edited by Zorn's Lemma, 23 September 2012 - 12:09 PM.

[KaptainKrazy]

Ok... So you took out that entire black piece? Sorry, I'm having a little bit of trouble understanding you. If so, you were supposed to remove the restrictor out of the black piece, not remove the entire section.

SGNerf's Photo

[quertyman]

Along with KaptainKrazy I am not quite sure what you are saying. But if you are talking about the piece KaptainKrazy mentioned you could probably cut a 1 in coupler in half and epoxy that on.

[Zorns Lemma]

Your lack of capitalization and massive run-on sentence(s) make an already poorly described issue inextricably harder to comprehend.

KaptainKrazy probably has the right clairvoyant intuition to your problem, and I'm afraid there's not much for helping you as the major longshot modification guides come with ample warning and pictures specifying exactly which pieces to remove and which to keep.

You could repair the damage with a suitable piece of plastic tube or pipe (try a 3/4" PVC endcap) but you'll probably botch reading comprehension any instructions on how specifically to do so regardless.

Edited by Zorn's Lemma, 23 September 2012 - 12:15 PM.