I simply took my Dremal and sanded the pin down with my drum sanding bit just enough to fit through the pilot hole. problem fixed! Works the same way.
Edited by quertyman, 23 August 2012 - 07:20 PM.
scroll saw blade fix!
Started by quertyman, Aug 23 2012 06:58 PM
3 replies to this topic
#1
quertyman
-
- Members
- 188 posts
Member
Posted 23 August 2012 - 06:58 PM
I have recently just bought a scroll saw and am planning on making a plusbow! But it turns out that the scroll saw I bought has pin end blades. As most should know the pins don't fit in the 5/32 size pilot holes slug recommends. I have figured out an easy way to fix this.
I simply took my Dremal and sanded the pin down with my drum sanding bit just enough to fit through the pilot hole. problem fixed! Works the same way.
I simply took my Dremal and sanded the pin down with my drum sanding bit just enough to fit through the pilot hole. problem fixed! Works the same way.
I have identified the problem: "maverick" -Daniel Beaver
#2
Zorns Lemma
-
- Moderators
- 1,277 posts
Sir Scrt
Posted 24 August 2012 - 09:57 PM
Did you consider just drilling a larger pilot hole.
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)
Kruger and Dunning (1999)
#3
quertyman
-
- Members
- 188 posts
Member
Posted 29 August 2012 - 04:40 PM
Ya I did but I thought this was better and worked with the templates better. And I just got my mc-master order today!
I have identified the problem: "maverick" -Daniel Beaver
#4
andtheherois
-
- Banned
- 821 posts
Member
Posted 30 August 2012 - 06:22 PM
Actually, They do fit in the 5/32 holes. Unless your pins are longer.
The YooToobz
Photobucket
Photobucket
Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
