Jump to content


Photo

longshot help needed

advice on a classic

10 replies to this topic

#1 Xakot

Xakot

    Member

  • Members
  • 9 posts
  • Location:greensboro, nc

Posted 02 August 2012 - 05:15 PM

Hey guys i recently got my hands on a classic ls and ironically i have dabbled with almost every blaster but it in the last few years so i have no experience with them. My question its besides an ar removal, spring replacement, reinforcement, and sg's version of the Angel breach what proven mods would be beneficial for a max rof high range hvz primary? Or would it be wiser to wait on the OMW immortal kit and if so would the performances be comparable?
  • 0

#2 BiwinningPanda

BiwinningPanda

    Member

  • Members
  • 172 posts
  • Location:Lanoka Harbor, NJ
  • State:New Jersey
  • Country:United States

Posted 02 August 2012 - 05:30 PM

Hey guys i recently got my hands on a classic ls and ironically i have dabbled with almost every blaster but it in the last few years so i have no experience with them. My question its besides an ar removal, spring replacement, reinforcement, and sg's version of the Angel breach what proven mods would be beneficial for a max rof high range hvz primary? Or would it be wiser to wait on the OMW immortal kit and if so would the performances be comparable?

Considering that you are coming here for help, I'll assume you should wait for the OMW kit, provided you have the money for one.
  • 0
LT.DAN ICE CREAM!!!!!! In response to the Tribal Council: Someone break out the Michael Jackson popcorn gif, this shit just got interesting.

#3 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts
  • Location:Dulles International Airport
  • State:Virginia
  • Country:United States

Posted 02 August 2012 - 06:12 PM

Hey guys i recently got my hands on a classic ls and ironically i have dabbled with almost every blaster but it in the last few years so i have no experience with them.


Where is the irony; is "dabble" innuendo?

Consider this a soft warning: every other member here is capable of pressing shift before i.

Edited by Zorn's Lemma, 02 August 2012 - 08:34 PM.

  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#4 Hammy

Hammy

    Member

  • Members
  • 104 posts
  • Location:Singapore
  • Country:Singapore

Posted 02 August 2012 - 07:11 PM

2/Get the Pump-Action priming kit.

It is recommended if your have incresed your spring strength, as there is a risk of breaking the bolt sled if you do not apply an equal force to both sides. Using the bolt action priming with just one-hand would be a no-no, you need to pull back on both sides.

1/ Buy those pre-cut Aluminium plates for strenghtening the Bolt Sled, then glue them on.
  • 0

#5 exploe

exploe

    Member

  • Members
  • 20 posts
  • Location:Oklahoma
  • State:Oklahoma
  • Country:United States

Posted 02 August 2012 - 09:34 PM

Well, if you're willing to shell out the money, Remedy metals is selling a high carbon, welded steel boltsled http://remedymetal.com/.

Edited by exploe, 02 August 2012 - 09:38 PM.

  • 0

#6 Xakot

Xakot

    Member

  • Members
  • 9 posts
  • Location:greensboro, nc

Posted 03 August 2012 - 12:17 AM

Where is the irony; is "dabble" innuendo?

Consider this a soft warning: every other member here is capable of pressing shift before i.

By dabble i have ar'ed, spring replaced, and alot of other performanced modded every other elite series blaster and some older ones like the bbb but never the ls ls which is generally one of the first guns for most. I have experiance with most just not the ls. X and hammy thanks for the advice.

Hammy what sight has your recommendations?

Edited by Xakot, 03 August 2012 - 12:22 AM.

  • 0

#7 Darthrambo

Darthrambo

    Member

  • Members
  • 116 posts

Posted 03 August 2012 - 08:38 AM

Hey guys i recently got my hands on a classic ls and ironically i have dabbled with almost every blaster but it in the last few years so i have no experience with them. My question its besides an ar removal, spring replacement, reinforcement, and sg's version of the Angel breach what proven mods would be beneficial for a max rof high range hvz primary? Or would it be wiser to wait on the OMW immortal kit and if so would the performances be comparable?


For RoF I'm doing this one a LS. Might be something you want to consider http://www.nerfrevol...=3031&start=143
  • 0

#8 BiwinningPanda

BiwinningPanda

    Member

  • Members
  • 172 posts
  • Location:Lanoka Harbor, NJ
  • State:New Jersey
  • Country:United States

Posted 03 August 2012 - 12:28 PM

By dabble i have ar'ed, spring replaced, and alot of other performanced modded every other elite series blaster and some older ones like the bbb but never the ls ls which is generally one of the first guns for most. I have experiance with most just not the ls. X and hammy thanks for the advice.

Hammy what sight has your recommendations?

At first I thought you were trying to make a joke, then I realized you honestly described every blaster you have dabbled with, and likely have no idea what the word "innuendo" means. Also, by sight do you mean website, or a sight for your blaster?

Edited by BiwinningPanda, 03 August 2012 - 12:28 PM.

  • 0
LT.DAN ICE CREAM!!!!!! In response to the Tribal Council: Someone break out the Michael Jackson popcorn gif, this shit just got interesting.

#9 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts
  • NerfHaven Subscription Supporter
  • Location:Salem, Oregon
  • State:Oregon
  • Country:United States
  • u/Parabolictoys on Reddit

Posted 03 August 2012 - 01:50 PM

Personally, I think adding OMW kits to your blasters is the cop-out pussy method of "modding". If you want to build skills that are applicable to future modifications you may like to perform, the Longshot is an excellent place to learn. They are finicky and complex, but also a very similar design to the new Elite blasters.
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#10 Xakot

Xakot

    Member

  • Members
  • 9 posts
  • Location:greensboro, nc

Posted 07 August 2012 - 07:01 PM

Zorn and panda- I know what innuendo means but there was no attempt at a joke here. In an effort to avoid further misunderstandings or making myself look like a bigger idiot I will simply state I own 30+ guns all of which have basics mods and five are Frankenstein projects with heavy modding, the irony in all of this is that I have never owned or modded a ls which tends to be a staple in most modders arsenal. I guess that's the joke if there is one.
Panda- Yes I meant site, my phone auto corrected it to sight, my apologies.


Finally, thank you guys for your advice ill refer to the modding directory from here on. Additionally if anyone has bolt sled re-enforcement recommendations besides those that are easily googled please message me.

Edited by Xakot, 08 August 2012 - 12:39 AM.

  • 0

#11 thedom21

thedom21

    Member

  • Members
  • 462 posts
  • Location:Saint Paul MN
  • State:Minnesota
  • Country:United States

Posted 07 August 2012 - 07:10 PM

It's not the Drac you think he is.
On topic, you could replace the plunger head, reinforce the boldsled and the other parts prone to breaking, and put upgraded springs in it.

Edited by thedom21, 07 August 2012 - 07:12 PM.

  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users