Jump to content


Photo

Hopper / RSCB Clip

Need some help with something

8 replies to this topic

#1 Griever 2112

Griever 2112

    Member

  • Members
  • 439 posts

Posted 24 July 2012 - 05:03 PM

First off I know that their is a difference between the 2. But this is my dilemma, I resprung my quadshot/handcannon it's go a LS spring, and 2 others, I truthfully don't remember what, but it's a bitch to prime and has a good output... I think. The thing is, singled barrel this is hitting 75-100 feet. However putting a RSCB it does nothing... literally dart is in the barrel, but, it will not fire the dart. Would a Hopper alieviate this or am I the first to make a Speedloader or Breeched handcannon?
  • 0

Griever 2112 still plays with his alpha trooper quite often despite owning one of the scariest +bows.

My Youtube Page

#2 evilbunnyo

evilbunnyo

    Member

  • Members
  • 404 posts

Posted 24 July 2012 - 05:13 PM

You've seen my 3b and my handcannon before griever I always use speedloaders because they only seem to work with those. I was told by someone that if you put a 3b spring in the handcannon it can shoot from a hopper.
  • 0
Silence is golden but duct tape is silver

#3 Griever 2112

Griever 2112

    Member

  • Members
  • 439 posts

Posted 24 July 2012 - 05:24 PM

Normally I would just go with what works. But this is going to be for my friend coming with me to APOC. And being his first war, I want to give him an easy to use blaster.
  • 0

Griever 2112 still plays with his alpha trooper quite often despite owning one of the scariest +bows.

My Youtube Page

#4 evilbunnyo

evilbunnyo

    Member

  • Members
  • 404 posts

Posted 24 July 2012 - 05:40 PM

Well my guy was fine with the speedloaders for his first time. He even figured out he could load one up full and shotgun like a mofo. If you did the deadspace removed wye I think you might have better luck. If not just make him a bunch of speedloaders and let him use those.
  • 0
Silence is golden but duct tape is silver

#5 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 24 July 2012 - 07:42 PM

you should be able to fire from a hopper, considering people do it with a LS PT and that's smaller than the handcannon one. how is your seal and your coupler to PT connection?
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#6 thesaz123

thesaz123

    Member

  • Members
  • 214 posts

Posted 24 July 2012 - 08:56 PM

I made a hoppered quadshot a few months ago. It works fine with the stock spring and an LS spring. It helps a lot if you replace the stock plungerhead with a 1.5in rubber washer. Makes a perfect seal. Using said specifications, and a 7 inch CPVC barrel, I easily achieved 80-90 foot ranges.
  • 0
Thesaz123: Noob Nerf Modder

#7 SlightlySane813

SlightlySane813

    Member

  • Members
  • 213 posts

Posted 25 July 2012 - 05:57 AM

I pretty much did the same thing as thesaz123 but I use a [k25] for a bit more power. Extending the draw might help as well.
  • 0
Also known as the French Canadian eh!

#8 Griever 2112

Griever 2112

    Member

  • Members
  • 439 posts

Posted 25 July 2012 - 08:36 AM

After going over it... Hero was right the connection wasn't as good as I though... I reset it up and when priming it fell right off was loose as anything... I think I have an idea to remedy this because I have a 1/2 CPVC coupler and it wasn't tight enough to support the RSCB.
  • 0

Griever 2112 still plays with his alpha trooper quite often despite owning one of the scariest +bows.

My Youtube Page

#9 hoongfu

hoongfu

    Member

  • Members
  • 475 posts

Posted 25 July 2012 - 08:38 AM

BabyGhandi has hoppered over 30 quadshots (yes thats right, maybe even more now) and I believe he uses a [k26] in them.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users