No replies to this topic

[Tinkerer]

What you need:
a solo brand 3oz plastic cup
duct tape
electrical tape
scisors.

the steps:
1: cut the bottom of the cup off at the edge of the little ridge at the bottom of the cup.

2: cut off all of the cup that is 1 inch above where you cut off the bottom.

3: cover the outside of your new ring in one layer of duct tape.

4: wrap the inside of the ring in one layer of electrical tape.

This ring is lighter, and faster than my previous ring design, but is more affected by the wind. I suppose I'll call them "Razor Rings" because they are so thin. By the way, you shoot them narrow end first. I have tested these rings, and they work as well as Evan Rings, perhaps better.

Also, with these rings, I now have two working homemade ring designs to my name.

Pics coming soon.