Nerf Spectre Plunger Reinforcement
#1
Posted 13 April 2012 - 03:37 PM
#2
Posted 13 April 2012 - 04:00 PM
#3
Posted 13 April 2012 - 04:33 PM
New Jersey is fuckin weird
#4
Posted 13 April 2012 - 08:19 PM
#5
Posted 14 April 2012 - 03:22 PM
Super glue melts plastic.You could use super glue, or better yet: melt the edges back together. I use a wood-burning tool when I weld plastics. You could also use some all purpose solvent.(avalible at lowes) But the best fix of all; use the stock spring!
Yeah dude, did it ever occur to you after the first or second broke that maybe you should stick to jst the stock, there are a ton of ways to get more power out out a gun rather than using a bigger spring.
The omw 2x spring isn't bigger just stronger, but if you are able to cut the most thin layer of epoxy putter you can, it should do and still won't be a really tight fit.
Check out my youtube channel for great reviews and modifications:
www.youtube.com/titanreceiver88
For even more detailed Nerf info, check out my blog
www.titanreceiver88.wordpress.com
#6
Posted 14 April 2012 - 03:40 PM
I think by bigger he meant stronger. It generally means the same thing.The omw 2x spring isn't bigger just stronger, but if you are able to cut the most thin layer of epoxy putter you can, it should do and still won't be a really tight fit.
But anyway, try to glue or, as previously stated, melt it together. After that, try to get craft foam in the bottom of the PT and on the plastic in front of the o-ring. This reduces stress GREATLY and makes it much quieter. The foam should dramatically increase the blaster's life.
#7
Posted 14 April 2012 - 04:01 PM
Super glue melts plastic.
No it doesn't. Superglue, (anything with cyranoacrylate as the base) is used on plastics all the time. If you sand the parts correctly before glueing them, all will be well. Also, I generally re-barrrel before I re-spring, or at least not too much re-springing. Barrels have the most effect on range, so I would suggest that you perform some other less-destructive mods first.
To everyone saying to melt the plastic back together: NO! That will "work" yes, but the bond will be weaker than a stock plastic connection. DO NOT DO THIS!
Also, so far, you've spent $60 on a blaster that is consistantly breaking on you. May I suggest you take a different project, at least until you are able to deal with this without wasting so much money?
#8
Posted 14 April 2012 - 07:53 PM
The bond can be just as strong as the original plastic, you just have to do it right. I use a adjustable temp soldering iron/wood burning tool. With the iron set on its lowest temp, it melts the plastic rather slowly. The low temperature does not weaken the plastic at all. Now, if you use a set temp iron, you will end up with a weak, charr- filled join.To everyone saying to melt the plastic back together: NO! That will "work" yes, but the bond will be weaker than a stock plastic connection. DO NOT DO THIS!
#9
Posted 14 April 2012 - 10:28 PM
And even if it is strong, you are likely to warp the plunger tube and/or the catch nub.The bond can be just as strong as the original plastic, you just have to do it right. I use a adjustable temp soldering iron/wood burning tool. With the iron set on its lowest temp, it melts the plastic rather slowly. The low temperature does not weaken the plastic at all. Now, if you use a set temp iron, you will end up with a weak, charr- filled join.
#10
Posted 15 April 2012 - 11:19 AM
Not if you do it correctly. You have to deal with this as if you were welding sheet metal. First you tack weld the crack in several places. Then, you go back and do another set of tacks next to the first set. This process is repeated until the entire piece is welded. Although it takes a long time, it is a proven method. With such a small amount of plastic to join, this would take a very short amount of time.And even if it is strong, you are likely to warp the plunger tube and/or the catch nub.
#11
Posted 15 April 2012 - 02:36 PM
Exactly, but no big deal. In the future, I suggest that you don't do spring replacements, especially if the first time it breaks the gun. For a gun like the Spectre, A simple AR removal, better plunger tube seal, and creating a better seal between the turret and gun could drastically improve the power of the gun.I think by bigger he meant stronger. It generally means the same thing.
As for your 2 or 3 other broken Spectres, I think that it would be possible replace the plungers with Maverick plungers. The internals directory indicates that the two are very similar.
I've also heard that a Titan's air tank fits into the front of a Spectre's shell almost perfectly. So, I guess if you have that an a Big Blast you could try to make a pistol sized shotgun or rocket launcher. Just some suggestions.
New Jersey is fuckin weird
#12
Posted 15 April 2012 - 05:19 PM
I can't recommend mixing parts, that's just a bit sketchy, but Titan pistols can be quite valuable if they have absolver attachments. If you don't want to shell out the $100 it would take to get two titans, (at least, that's what it would cost if you didn't have any/aren't able to trade) then look into PVATs, I think one with a 2" PVC base may fit cleanly.Stuff and good advice.
As for your 2 or 3 other broken Spectres, I think that it would be possible replace the plungers with Maverick plungers. The internals directory indicates that the two are very similar.
I've also heard that a Titan's air tank fits into the front of a Spectre's shell almost perfectly. So, I guess if you have that an a Big Blast you could try to make a pistol sized shotgun or rocket launcher. Just some suggestions.
Hamoidar: Even if it is possible to melt plastic back together while keeping the strength and original shape, if he's never done anything like that before, then it's not advisable. Anyone can use superglue, it doesn't take any training or experience, and it's really hard to mess up. And lastly, it costs a lot less for a few dots of superglue than it does to buy a tool that he may rarely use. I'm not trying to be a dick, but your suggested method just isn't the best for this situation.
Edited by Exo, 15 April 2012 - 05:24 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users