So basically my question is if white lithium grease if safe on your blasters or not. I've used it a few times on moving parts and o-rings. I know its safe on the plastics but not entirely sure on the o-rings. Answers would be appreciated, thanks!
5 replies to this topic
#1
Posted 15 March 2012 - 06:25 PM
#2
Posted 15 March 2012 - 06:45 PM
Yes, I use it on mine and it works perfectly. O-rings do not corrode.
I use the Lucas Oil stuff in the blue tube from home-depot. But I am assuming all white lithium grease is the same shizz.
I use the Lucas Oil stuff in the blue tube from home-depot. But I am assuming all white lithium grease is the same shizz.
Hablamos EspaƱol
#3
Posted 15 March 2012 - 10:46 PM
Yes, white lithium grease is safe on plastic and rubber.
This thread has a good amount of information on lubricants with Nerf: http://nerfhaven.com...opic=16267&st=0
The thread states "plastic safe" but the ones he points out are good for Nerf in general, meaning they're safe on rubber as well.
This thread has a good amount of information on lubricants with Nerf: http://nerfhaven.com...opic=16267&st=0
The thread states "plastic safe" but the ones he points out are good for Nerf in general, meaning they're safe on rubber as well.
On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.
#4
Posted 16 March 2012 - 07:39 PM
I too use white lithium grease for just about everything. Works fabulously, no problems. Yes, redundant information, but another report builds security.
#5
Posted 16 March 2012 - 08:05 PM
I also use white lithium grease, although I only use it in homemades, as it tends to have a too high viscosity for low power guns.
NerfHaven > Your control panel > Profile > Change Signature > Inserts dumb sig > What! No pictures! > Inserts next best thing: http://nerfhaven.com...howuser=114052' class='bbc_url' title='External link' rel='nofollow external'>Best thing on Nerfhaven!
#6
Posted 17 March 2012 - 03:10 PM
Thanks everyone, i'll be sure to keep using it!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users