SM3k problem
#1
Posted 14 March 2012 - 07:51 PM
#2
Posted 14 March 2012 - 08:13 PM
Go Nerfhaven!
Langley: I'm sorry we went off topic in your thread about exploding Easter bunnies. We'll try to do better next time.
#3
Posted 14 March 2012 - 08:33 PM
No, it does not hold air at all, when it decides not to fire. When you pump it, the air just blowes out the barrel.When you say it fires sometimes, the times it doesn't, does it hold air (leaking maybe) or trigger just not pull it?
#4
Posted 14 March 2012 - 08:37 PM
Then its the washer that seals the tank. You need to take it apart.No, it does not hold air at all, when it decides not to fire. When you pump it, the air just blowes out the barrel.
Go Nerfhaven!
Langley: I'm sorry we went off topic in your thread about exploding Easter bunnies. We'll try to do better next time.
#5
Posted 14 March 2012 - 08:40 PM
If it's the washer, then why does it sometimes fire?Then its the washer that seals the tank. You need to take it apart.
#6
Posted 14 March 2012 - 08:52 PM
22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit
11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo
#7
Posted 15 March 2012 - 06:16 AM
It sometimes will be in place, but after you have shot the tank while it works, the washer then is out of place again.If it's the washer, then why does it sometimes fire?
Basically, it moves around, not always sealing.
Go Nerfhaven!
Langley: I'm sorry we went off topic in your thread about exploding Easter bunnies. We'll try to do better next time.
#8
Posted 15 March 2012 - 10:45 AM
That makes sense, I will take it apart and see. Thanks for all your help.It sometimes will be in place, but after you have shot the tank while it works, the washer then is out of place again.
Basically, it moves around, not always sealing.
#9
Posted 15 March 2012 - 12:12 PM
#10
Posted 15 March 2012 - 12:33 PM
I opened the blaster up and found a leak at the tube connection at the tank. Also the washer at the front of the tank had come off of the white pin. It is working fine now, thanks to every one!If it's not an issue with the tank, I would check the trigger for stress marks (if it flexes when pulling the pin that would explain why it doesn't fire sometimes), check the tubing for kinks (Especially if you leave the OPRV in, a kink can make the pressure high enough to stop any air from getting to the tank), and possibly the cam placement. Try functioning the blaster with only half a shell to try and see what's going on.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users