5 replies to this topic

[Z64052187]

All right, I've searched left and right, and I can't find answers elsewhere, so here goes:

I've got an Over-Under Double Shot that won't eject the shells. Any solutions out there? Is this a common issue?

[ThatBritishGuy]

All right, I've searched left and right, and I can't find answers elsewhere, so here goes:

I've got an Over-Under Double Shot that won't eject the shells. Any solutions out there? Is this a common issue?

Have you opened the gun at all? Because i had problems with the ejection mech after i opened mine but i fixed it.

Also pics are always helpful if you aren't sure about internals placement.

[Z64052187]

The blaster is entirely unopened. It came stock with this issue. The two catches that hold the shells in place don't release when the blaster's breech is open.

[ThatBritishGuy]

Does the barrel setup come all the way down? Because you have to pull it much farther on the new style than on the old style.

If you still have problems, you can open up the ejection mech on the side of the barrel but it may get even more f-ed up by doing this.


This is how it should look, (but with the spring loaded arm in place for both barrels)

[Z64052187]

yeah, I just opened that up, probably as you were typing. The lower arm of the ejection lever was snapped off, to it didn't catch and release the shell-catches. Damn. Oh well, thanks for the help man.

[ThatBritishGuy]

No problem, i ended up crayola-ing mine after this as mine broke too. It looks like its a common issue.