Reviving supermaxx 5000 help
#1
Posted 10 February 2012 - 05:57 PM
these are the internals for my sm5k right now. i have the original pump connected to a 1500 tank but i was wondering what the best way to connect the firing pin to the trigger is?
#2
Posted 10 February 2012 - 05:58 PM
these are the internals for my sm5k right now. i have the original pump connected to a 1500 tank but i was wondering what the best way to connect the firing pin to the trigger is?
You could probably take a long metal rod at epoxy putty it together.
20:07 tiredKitty living in NYC, you could spend a lot of time in Chinatown and only speak the mother tongue
20:07 tiredKitty Not a good idea, btw.
I have identified the problem: "maverick"
#3
Posted 10 February 2012 - 06:41 PM
That way you don't have so much deadspace in the tubing and there is less of a chance if bending your firing pin.
I would connect the firing pin to the tank using a metal rod of some sort.
#4
Posted 10 February 2012 - 08:24 PM
#5
Posted 10 February 2012 - 11:55 PM
#6
Posted 11 February 2012 - 12:02 AM
What happened to the original tank? Or is this a different SM5K shell?
... That way you don't have so much deadspace in the tubing...
Technically, it's not 'deadspace'. The extra length of tubing acts more like a tank expansion. It's not the most efficient tank expansion but there is more air being expelled upon release.
#7
Posted 11 February 2012 - 12:30 AM
[18:17] <+Nerfer> pls dont call me that
[18:18] * Nerfer is now known as Guest17574
[18:18] <+Lucian151> Woah its Beefy Theify
[18:19] <+Guest17574> STOP CALLING ME THAT IM NOT FAT
[18:19] <+Guest17574> pls
#8
Posted 11 February 2012 - 05:51 AM
Technically, it's not 'deadspace'. The extra length of tubing acts more like a tank expansion. It's not the most efficient tank expansion but there is more air being expelled upon release.
True, but sometimes less pumps is better.
My advise: grow some balls and fix the 5k tank, or put a 4B tank in there instead. There's no point for an oversized singled 2k.
You could also put a water gun tank inside. I believe ahtanie and Drac have done similar things.
#9
Posted 11 February 2012 - 07:55 AM
Barrel in (its 5/8" od PETG)
For some reason I can't find a picture of the barrel out, but when I get a chance I'll get a better detailed picture.
Detail on the 3k tank location. The cut was made by a prior owner.
Or you could keep the tank at the front and make a nifty slide breech that locks into the front of the blaster. For this I would bend some music wire into a long pin that links both the trigger and the tank. A blowtorch used to heat up the wire works very well. Just make sure the wire is cool before putting it near anything.
Edited by louiec3, 11 February 2012 - 07:57 AM.
#10
Posted 11 February 2012 - 10:36 AM
My advise: grow some balls and fix the 5k tank, or put a 4B tank in there instead. There's no point for an oversized singled 2k.
Well seeing that the 5k tank is broken me putting it in there wouldn't do much good now would it?
#11
Posted 11 February 2012 - 10:40 AM
I dropped a 3k tank in my 5k, and then made an elongated coupler (about 6") of 21/32 brass that extended to the front of the blaster. This allows me to use regular cpvc as a barrel, and i just need to pull it out drop a dart down, and then push the barrel back in. The best part was that there was no cutting of the shell, and the tank relocation allowed me to use the stock 3k firing pin.
Barrel in (its 5/8" od PETG)
For some reason I can't find a picture of the barrel out, but when I get a chance I'll get a better detailed picture.
Detail on the 3k tank location. The cut was made by a prior owner.
Or you could keep the tank at the front and make a nifty slide breech that locks into the front of the blaster. For this I would bend some music wire into a long pin that links both the trigger and the tank. A blowtorch used to heat up the wire works very well. Just make sure the wire is cool before putting it near anything.
alright thanks alot I did want to keep the tank infront because I like using my rscb
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users