3 replies to this topic

[hydro cannon kid]

USER WAS WARNED FOR THIS POST

As you know, Nerf these day's has bin resorting to mainly reverse plungered blasters. For any of you that dont know what a reverse plunger is, its a

new plunger desine were the plunger tube is moveing to make the air pressure instead of the plunger rod. NOW not only dose this desine offer

very little plunger stroke, but they will only accept certain spring diameters. You could build a power stock but if your new spring can't compress

enough your blaster wont prime. However you could buy an orange mod works spring but that could cost you almost 20 more bucks, and without the

protection of that dam a'r the back of you plunger will pop off in about four weeks unless you can get your hands on a mega dart to pad the plunger.




I'm getting sick of buying vintage and non nerf blasters and I would like your idea's on how we can deal with this issue!!!

Edited by Langley, 04 February 2012 - 06:24 PM.

[evilbunnyo]

Omg my eyes.
Sorry langley that was stupid.

Edited by evilbunnyo, 04 February 2012 - 07:02 PM.

[Langley]

As you know, Nerf these day's has bin resorting to mainly reverse plungered blasters. For any of you that dont know what a reverse plunger is, its a

new plunger desine were the plunger tube is moveing to make the air pressure instead of the plunger rod. NOW not only dose this desine offer

very little plunger stroke, but they will only accept certain spring diameters. You could build a power stock but if your new spring can't compress

enough your blaster wont prime. However you could buy an orange mod works spring but that could cost you almost 20 more bucks, and without the

protection of that dam a'r the back of you plunger will pop off in about four weeks unless you can get your hands on a mega dart to pad the plunger.

I'm getting sick of buying vintage and non nerf blasters and I would like your idea's on how we can deal with this issue!!!

This really is painful to read, and even if it wasn't there's no need to have a discussion about how we can 'deal' with this 'issue'. Hasbro isn't going to make any more blasters that are an air restrictor away from typical NIC ranges. If you have a blaster with a reverse plunger, reinforce it, mod around it, or don't use it. Everything you need to know is already on these boards.

If you make another post like this (inexplicably double-spaced, full of grammar and spelling errors, generally difficult to read) then you will be suspended.

Omg my eyes.

This...isn't helping.

[KaptainKrazy]

Ther are ways to convert reverse plunger blasters to plain ol' plunger blasters, here's an example
http://nerfhaven.com...showtopic=19107