I picked up a Nerf Hydro Cannon this Winter in hopes of making a dick gun. I opened it up and realized it's leaking in the area it pivots to open the dump valve.
Has anyone else experienced this? Is it fixable? It seems like it's mostly leaking out of the screw hole which I know is fixable but it's also leaking around that area.
Hydro Cannon Blues...
Started by meatballica, Jan 28 2012 10:52 PM
1 reply to this topic
#1
meatballica
-
- Members
- 130 posts
Member
Posted 28 January 2012 - 10:52 PM
"You've waged your war on nerves, but you can't crush the kingdom."
#2
abowden
-
- Members
- 19 posts
Member
Posted 28 January 2012 - 11:24 PM
Yes, I tried to fix it my gluing over the leaky area, but in the end I had to replace the valve, for your purposes, I would suggest a hardware store ball valve the king you use on the end of rscb, but I connected it to vinyl tubing, because I was going to use it in a full auto shot blast, I recommend cutting it just bellow the ball valve, and using pvc in the short fat tube part to reduce it down to the ball valve. (but I used 24mm, 20mm, and 16mm electrical conduit, the Australian version of cpvc)
Edited by abowden, 28 January 2012 - 11:26 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
