Edited by Chipaton, 27 January 2012 - 10:27 PM.
5 replies to this topic
#1
Posted 27 January 2012 - 08:13 PM
I have a titan problem where if I pump it past the max on the pressure guage , it wont fire. sometimes it will fire spurts of air , though typically it just doesnt fire. to fix it I must stick a dowel into the barrel and release the air that way. Does anybody know of a fix or had this problem? Thanks. UPDATE : It does fire , though not when pumped to the max.
#2
Posted 27 January 2012 - 08:33 PM
Internal pics would definitely be helpful.
Possibly your trigger got disconnected from the firing pin?
Possibly your trigger got disconnected from the firing pin?
#3
Posted 27 January 2012 - 08:37 PM
The sealing o-ring may also disconnect from higher pressures.
...Man, if I lived on Oahu, I would've dropped in on Pineapple by now. On Molokai. Via Kayak. ...Fuck, we're depending on you guys to defend us from 3DBBQ, get your shit together already.
#4
Posted 28 January 2012 - 03:06 AM
I had a similar problem with mine. To fix it I hotglued the spring at the end of the firing pin on the tank to prevent it from compressing, which solved the problem completely.
Don't worry so much about what other people will allow. Throw your own wars and kick your friends' asses until they all want one.
#5
Posted 28 January 2012 - 08:10 AM
If you have plugged pump, the pressure inside the air tank might be pushing too hard on the release valve. Doing a bic pen mod on the firing pin will help, but if you're lazy, you can just hot glue over the spring on the firing pin.
the only mod you can have is the range extetder mod.
#6
Posted 28 January 2012 - 11:41 AM
i havent done anything internally , just couplered it. Thanks
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users