I just bought a Tech Target and wasn't too impressed with range, but the problem was the use of the larger darts. I looked at the mod on the site and was wondering if the way they modded that would allow it to use the minis. Thanks.
Modding A Techtarget To Use Miniammo
how can you modd a techtarget so it ...
Started by
spazkake
, May 22 2004 07:08 PM
7 replies to this topic
#1
Posted 22 May 2004 - 07:08 PM
[FONT=Geneva][SIZE=14][COLOR=red]NERF
#2
Posted 22 May 2004 - 07:29 PM
I think so, but, here's an even simpler mod:
1: rip out the pegs in the barrels and air restrictors
2: cut a couple pieces of cpvc to the legnth you want
3: wrap the cpvc in electrical tape until it fits tightly in the ttg's barrels
4: ram 'em down the barrels.
there ya' go.
1: rip out the pegs in the barrels and air restrictors
2: cut a couple pieces of cpvc to the legnth you want
3: wrap the cpvc in electrical tape until it fits tightly in the ttg's barrels
4: ram 'em down the barrels.
there ya' go.
Actuall directions on some products:
On Pudding
"Product will be hot after heating"
On a Sweedish Chainsaw
"Do not try to stop with hands or genitals"
(Was alot of this happening somewhere? MY GOD!!)
On Pudding
"Product will be hot after heating"
On a Sweedish Chainsaw
"Do not try to stop with hands or genitals"
(Was alot of this happening somewhere? MY GOD!!)
#3
Posted 22 May 2004 - 07:37 PM
I just did the same thing to an eagle eye with a crayola barrel today and some duct tape. I'm really excited about this new clear duct tape. Anyway, anything that's the right size for micros (1/2") that you can shove into the barrel tightly should work.
NERF OR NOTHIGN!11!eleven!!!one!!!one!11!!!!onhoundredandeleven!!!!!
#4
Posted 22 May 2004 - 08:36 PM
I'm really excited about this new clear duct tape
Its the same as always, just clear...I have some, nothing special.
THIRST
ko
#5
Posted 22 May 2004 - 09:32 PM
Don't diss the clear duct tape! HOW WOULD YOU KNOW WHATS UNDERNEATH IT!!!! ponder...
[FONT=Geneva][SIZE=14][COLOR=red]NERF
#6
Posted 22 May 2004 - 09:55 PM
My tech target is now more powerful than my LnL. Kinda depressing how the most infamous nerf pistol is bested by a cheap gun witha shoddily built target game. OH THE SHAME!!!!
Yeah, life sucks, but it does guarantee a trip around the sun every 365 days.
#7
Posted 22 May 2004 - 11:07 PM
That effect is what I'm going for. Seeing as I cant find an LnL anywhere.
[FONT=Geneva][SIZE=14][COLOR=red]NERF
#8
Posted 23 May 2004 - 09:45 PM
In any case, my tech target is modded like so. Take apart the barrel, drill out the air restrictor and attatch a crayola barrel to the stub using epoxy. 24 hours later, reattatch the stok barrel to the outside of the crayola barrel. Note the two holes in the side. I just put a little hot glue and wrapped it with e tape. Then stretch your spring and close her up. Take a small segment of 1/2 in. PVC and glue it to the front of your barrel for stabilization. Tah dah!
Yeah, life sucks, but it does guarantee a trip around the sun every 365 days.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users