3 replies to this topic

[Eraser475]

Materials:

1. Cpvc

2. Hot glue

3. Scrollsaw/bandsaw

4. Goop



Instructions:

First, get your tek-4:



Open it up:



Take the orange turret off. ( I forgot to take a pic of this, but I'm sure you can figure it out)

Chop the stock barrels of until it looks like this:



Cut 4 pieces of cpvc that are 2.5" long:



Glue/goop the barrels onto the turret:



Add a barrel spacer by taking a piece of scrap cpvc and gluing it between the barrels.

Put the turret back into the blaster:



Close the blaster up:



You're done!


Stock ranges: 15-20' flat

New ranges: 35-40' flat

Edited by Eraser475, 25 December 2011 - 07:54 PM.

[hamoidar]

Good job, very clean. The one thing I would do diferently would be to use something other than hot glue to secure the barrels on. Like epoxy or super glue.

[Eraser475]

I did goop them on, too but I forgot to mention it.Oops!

[spencerak]

Good job, easy to follow. You have really been on fire with these write-ups recently.