7 replies to this topic

[yomullensup]

will the two thousand work just about the same after being modded? Can I use the airtech 3000 mod on the airtech 2000 or will the dimensions be all messed up?

[Formerly Sane]

Are you talking about doing a at3k barrel mod or at3k liquitron guage drain mod thing? A barrel mod could be done with petg on an air tech 2000. You can also use any barrel material you really feel like using on that gun if you want. As for draining the liquitron guage, I don't really have any experience in this. I suppose you could but it'd be best to consult someone else before starting. Yeah, and good job at finally posting in the english language and separating your posts into sentences.

[NinjZ]

By dimensions being messed up, do you mean barrel length? I think the at2k barrels just need to be slightly shorter than the at3k. I dont think draining the liquatron thing makes the gun any better or worse.

[Talio]

If anything they need to be longer.

Edited by Talio, 18 May 2004 - 04:22 PM.

[cxwq]

If you're retaining the multi-barrel turret, I'd stick with 6". If you're going single barrel I'd up it to 7".

[Hunter]

There are plenty of AT2000 mods out there. I did a 7" Single Barrel 1/2" PVC. Drain the goo just like the 3000.

[Crankymonky]

My airtech 2000 has 4, 8" inch barrels of 1/2 inch cpvc. The liquitron has been drained and is now part of the airtank. I get much improved ranges over the airtech 2000 without extended tank, however cxwq did not(10 pumps). It now breaks a pair of cheap sunglasses as well as shoots through empty can of mountain dew. I will post pictures on Thirst and my site soon.

Crankymonky

Edited by crankymonky, 18 May 2004 - 08:56 PM.

[stevo123]

In simple terms, It hurts like a bitch.