6 replies to this topic

[bear]

Ok say you've have finished your qaudshot but theres one prblem it's only getting five feet.there is a cause for this you might have not super glued your plunger seal to the pt ; and if you actauly want a good primary you put plethra of springs in the sealer is eventauly going to fall off. But no worry I have found a soulution.sorry no pics


*dollar store sponges
*super glue
*paper
*dremal
*pencil
*qaudshot



ok shall we get started. First take your dremal and dremal out the whole left side in the front. Now you can see the problem. If the seal is the problem follow on if not check some other place.now take your paper and cut it into a little spaure slide that sqaure into the dremaled out area.use your pencil to on the little sqaure trace the outlining of the airflow hole. take it out and cut that then place that out on a sponge using sharpie trace it four times cut out poke holes in the mini sponges then put super glue on the outlining place on each hole and you should be good to go.
















-bear

[yennepnollad]

I really don't see anything good here. Why would you use a dollar store sponge to make a seal on anything? Also, you should run your post through microsoft word before posting to check the spelling, just a suggestion.

[andtheherois]

First you should fix some of your grammar. Second give use pictures. Without pictures to show us what you mean it's not a very good write up.

[DartGirl]

'bear', on 07 Nov 2011 - 11:11 PM, said:

... you might have not super glued your plunger seal to the pt...

Sorry If I've misinterpreted your poorly-worded/spelled write-up. But if you were to super glue the seal to the PT then you would have a non-functioning blaster.
I guess you could throw it at someone.

--DG

[bear]

Ok using the suggestions I will contribute to this hard core society. after 10 months of my reasearch on this haven I have gathered all thou suggestions. art thou will contribute ;sorry for the diguistingness of my prior entry.once I figure out how to post pictures I will post a solid nitefinder automatic.As I have stated my grammer will be fixed . But how do you post pictures. This software,document style is far off different than hp office.Thank you all for your suggestions.Now how do you post pictures,that is my only question to this community.Yes; the sponges leaked air today my temporary fix is a rubber washer. Sorry it is my mistake to epoxy putty the shell togather but my grammar will be fixed and now I will give the community something to aww at.Maybe automatic pistols

Edited by bear, 07 November 2011 - 10:44 PM.

[evilbunnyo]

To post pics simply upload them to a photohosting site. Then use the img tags and insert the picture. Also WTF do you mean you have an automatic nitefinder. I'm calling bullshit on that.

[Langley]

'andtheherois', on 08 Nov 2011 - 02:20 AM, said:

First you should fix some of your grammar. Second give use pictures.

Really?



Bear, I'm just going to take a stab and guess that you're about 12. That gives us a year to catch up to you, given that you're obviously just too advanced for any of us primates to comprehend. Enjoy your time off. You've earned it.