Posted 08 September 2011 - 07:37 PM
Posted 08 September 2011 - 09:04 PM
I have recently acquired an air compressor for airbrushing that can pump up to about 58psi. I want to use this to create an air tank mod for my magstrike. As I know nothing of these kinds of mods, what should the maximum psi be for pumping up the tank? I don't like the idea of a air tank exploding in the stock of the gun, next to my shoulder.
Either attach a stock OPRV to the tank or buy one from McMaster.
"...if you've ever suffered the effects of a fucking faggot retard overpopulation, you'll understand what devistaiting effects it can have on one's psyche." - Talio
Posted 08 September 2011 - 09:13 PM
Posted 08 September 2011 - 09:23 PM
If you want to replace the rubber bladder that will be a pain and need a regulator or something of the sort. I see this as a excellent candidate for Assault and Overload mods, the latter being an upgrade to the former.
Edited by Curly, 08 September 2011 - 09:23 PM.
Posted 08 September 2011 - 09:37 PM
By not removing the pump you keep the OPV on the pump.
The magstrike OPRV is a blast button-like thing at the end of the bladder. When it expands, the button presses against the shell and vents air. The pump has no OPRV at all. So, putting a Tee between the pump and bladder and hooking up the AC there would be perfectly safe, just make sure you can hear the valve venting when full.
Edited by BOSS9, 08 September 2011 - 09:39 PM.
Posted 09 September 2011 - 09:12 AM
SgNerf MS air compressor integration
It's a gorgeous mod. Just follow that (as much as possible)
Edited by shmmee, 09 September 2011 - 09:13 AM.
Posted 10 September 2011 - 10:13 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users