2 replies to this topic

[The lord of fish]

I went on a quest to buy a bunch of blasters that most people turn their heads away. My journey started with the tek 4. I also wanted to cram in as many mods as I could before I leave for 4 weeks. I also apologize to anyone I may have insulted, I mean no harm.

Materials needed:
Glue of choice
cpvc coupler
pliers


stock it has a manual rotating turret, and shoots a pitiful 15 feet. I was expecting to see at1k internals  
Open your tek 4 up,  Wow thats much different then a at1k.

Heres the plunger, Its rather interesting.

the seal on my turret sucked, I'll try turreting my other one, so snip it off.

The end of the plunger tube should now look like this:

Glue a coupler on

Finished internals

Closed up:
It vaguely reminds me of the phoenix in perfect dark, but only ever so slightly

ranges(with the darts included are averaging in the mid 40's with an occasional dart that lands in the low 50's. This is in feet, not temperature.
This blaster is not something that should be called crap, its not amazing but its getting 50 foot ranges with stefans, theres 2 in a pack and its only 10 dollars (can be found on clearance for way cheaper).  I'll try later with the other one.

[mysterio]

Nice to see someone using these Buzz Bee blasters.

[SonReeceSonJensen]

I whole-heartily support your efforts to de-suck or lessen the suckage of normally buttass Blasters!

That being said I have one small mod that should add a few feet: widen the air hole on the plunder tube. Just stick a drill bit in there and you're good. You could probably still do it without opening it up.