Hi, I am modified my nerf swarmfire. I removed the ARs, added padding to the plunger to help dampen any damage, and no I am trying to added an aftermarket spring, preferably around 10kg. Problem is I can't find any place that sells the springs with the right length and weight load. I tried using wire cutters to shorten the spring, but they didn't even make a dent into the metal. Anyone have any ideas on what I could do?
thanks
Swarmfire Spring trouble
Started by Pyrobob, Jul 25 2011 06:41 PM
5 replies to this topic
#1
Posted 25 July 2011 - 06:41 PM
#2
Posted 25 July 2011 - 06:54 PM
Use a cutoff disk on a dremel/rotary tool.
Edited by The lord of fish, 25 July 2011 - 06:54 PM.
Do you think she'll sleep with a panic switch?
#3
Posted 25 July 2011 - 07:00 PM
First of all, you might need some punctuation, And if you want a 10 kg spring that's close to 20 pounds of force.
I would recomend a little less stress on the motor.
A [k25] spring is the best choice.
If you want to cut any spring dont use wire cutters, use a dremel cutting disk. Don't worry about sparks when cutting.
I would recomend a little less stress on the motor.
A [k25] spring is the best choice.
If you want to cut any spring dont use wire cutters, use a dremel cutting disk. Don't worry about sparks when cutting.
"the peinus itself is a handle"
- Kane the medeocre
- Kane the medeocre
#4
Posted 25 July 2011 - 07:10 PM
Hey, thanks for the quick replies. Any idea where I can get a [k25] spring or am I gonna have to order it online?
#6
Posted 26 July 2011 - 12:28 PM
nevermind
Edited by knexpert66, 28 July 2011 - 10:04 AM.
Please, call me Busted.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users