I'd like to tell you all a way how to solve your longshot clip accepting problem without cutting the priming chamber

Some time ago my longshot has been acting funky. :|
The problem was that it didn't catch far back enough to accept the clip,
which meant I had to close the breech in order to put the clip which got really annoying.
My first thought was to cut the priming black piece by half a centimeter but, I thought to myself that there could have been something that caused the problem in the first piece. :|
Months later after re lubricating my blaster, found the ultimate solution.
It turns out that I placed my plunger head in the wrong position.
Okay, for those of you modders that have this problem and haven't taken action open up your longshot and take a close look at your plunger rod and head.
Now that your done that, see those four notches on your plunger head ?
If you have the problem I discussed earlier the four pegs from the plunger head will be out of alignment with the four nocthes
on the plunger head.
The next step is simple, just take out the plunger head and put it back in making sure it is all aligned.
Now put it all together and it should all work smoothly with the problem no longer in presence

So overall this is a great solution that everybody should do, especially if they go through this sort of problem.

Thanks for reading my post.
I'm trying to Improve my posting so, feel free to tell me how to improve.

By the way, I apologize for not adding pics.