4 replies to this topic

[Elvis]

[FONT=Courier][COLOR=blue]I need help. Im a begining moder and i do not now how to mod very well. Does anyone have any good night fire mod ideas. If you do please reply. Thank you

Edited by Elvis, 27 April 2004 - 08:20 PM.

[NinjZ]

dude, do you relise there is a nite finder mod in the mods section of this site? go to google and type "nite finder mod".

[Ice Nine]

Or click mods and then go to Nite Finder mod.

Try doing a little research first; it'll help.

You don't have to use PETG for this mod. You can use brass or CPVC or normal PVC, depending on what kind of darts you'll be using.

[Techno-Dann]

I used copper on mine. It shoots micro stefans 50-60 feet.

[tanner 07]

I modded my nite finder. The first thing you do is take it all the way apart. The next if you see all those wires remove them by unscrewing all the screws holding the eletrical things on. (I removed the laser part of the gun also because it wont work after this.) After you unscrewed every eletrical part of the gun take out the back ammo holder. (ammo holders right next to each other) Once your done with that put the gun back together (keep the one ammo holder that you took out, leave it out of the gun) except leave the bottom of the handle off. Once you have it put back together look at the bottom of the handle and there will be holes of were you put the battery, but it also fits micro darts the same kind of darts that fit in the gun how nice but if you just put them in now they will fall out. Thats what the ammo holder that you took out earlier is there for. So first carve out the bottum of the barel until the ammo holder can fit into it. Next Hot glue it inplace so that when you put to micro darts they slide right into where that batteries go. after that wait for it to dry and you got yourself 2 more ammo storage places on the gun. (After this you cant open the gun back up unless if you want to ruin the mod you just did.

If you dont get how to do it sorry i dont have any pictures so i cant really help you on that.