Jump to content


Photo

Firsthot/tetrastrike Integration


2 replies to this topic

#1 bennorco

bennorco

    Member

  • Members
  • 126 posts
  • Location:Scotland, Ontario
  • State:Ontario
  • Country:Canada

Posted 28 January 2011 - 01:08 PM

I Took an old tetra strike, and an a broken first shot. I put the tetra strike in the first shot. I used two of the tetra strikes tanks, and attached the pump. I ran hoses from the tanks to the barrel. For now, the trigger is a zip tie that goes out the back of the gun and is hooked to the tank pins.

Posted Image

Posted Image

Posted Image

It gets around 25 feet but only one pump is hooked up right now. The range sucks but I found a use for two broken guns!

If you want a write up or a video, I will make one.

Edited by bennorco, 28 January 2011 - 03:54 PM.

  • 0
Buy this stuff^

#2 knexpert66

knexpert66

    Member

  • Members
  • 133 posts
  • Location:Somewhere

Posted 28 January 2011 - 10:19 PM

I guess this would be good if yove got a first shot shell or broken one, but otherwise your just better off with the classic first shot internals. Nice write-up though!
  • 0
Please, call me Busted.

#3 bennorco

bennorco

    Member

  • Members
  • 126 posts
  • Location:Scotland, Ontario
  • State:Ontario
  • Country:Canada

Posted 29 January 2011 - 02:47 PM

I guess this would be good if yove got a first shot shell or broken one, but otherwise your just better off with the classic first shot internals. Nice write-up though!


My internals on the firstshot kind of exploded. The plunger rod snaped in 3 places, and the catch broke. So I had two broken guns and had to find a use for them!
  • 0
Buy this stuff^


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users