6 replies to this topic

[Niteshot]

Hey, everyone. I'm going to keep this simple. I opened up my barricade today, and did SG Nerf's Jam door switch removal mod, but when I did, I accidentally broke off the wires to the flywheels. I took off these two rubber things sticking out of the leads to the motors. I then simply soldered the wires back, and now my gun doesn't work. Someone please tell me what the hell I did wrong?

Edited by Niteshot, 29 December 2010 - 11:09 PM.

[chase]

You might of soldered the wires to the wrong connections.

[Niteshot]

I've considered it, but its highly improbable. The positive wire is shorter than the negative, and there's no way to put the flywheels back in unless the shorter positive wire is soldered to the lead closest to the inside of the gun. (Am I making sense?)

[Y-Brik]

Pictures?
how good are you at soldering? You didn't cook anything did you?

[Niteshot]

Pictures will be up in a moment. And, as far as my soldering skills, I wouldn't say I'm a pro, but I know my shit.
EDIT: Big fucking pictures ahead.
This first picture is of the soldered circuit.

The second is of the negative wire soldered to the (I think) Negative lead.

The third is of the (I think) Positive wire soldered to the positive lead.

I don't know if this helps, but I hope it does.

Edited by Niteshot, 29 December 2010 - 10:36 PM.

[Niteshot]

Mods, Please close this thread.

[Niteshot]

I wrapped tape around the flywheels to increase traction. Tape prevented them from spinning. Its that simple.