Bungee Blasters And Secret Santa!
#1
Posted 17 December 2010 - 06:43 PM
#2
Posted 17 December 2010 - 06:51 PM
Just some ideas.
In Soviet Russia, blasters mod YOU!!
In Soviet Russia, darts shoot YOU!!
legendary, just...legendary
I make home-mades
#3
Posted 17 December 2010 - 07:55 PM
Wow. I never get stuff like that at school. You got a good secret santa dude.Today in school we finally got to give our secret santa our presents! And who knew that the person who got me was the only other nerfer in the school. He got me a little blaster called the " AIRBOW SHOTZ " This thing is Effeminate. Look it up for a picture. Its about 1 foot long when it isnt cocked. The draw is atleast 6 or 7 inches. But you have to put the dart OVER the barrel post thing. And it is a bungee blaster which is basically pull back and push foward to fire. Except the bow arms have a strong bungee cord tied on to both ends which is then attached through the thing that you pull back to fire. Any idea on how to mod it? There are no screws.
#4
Posted 17 December 2010 - 07:59 PM
#5
Posted 17 December 2010 - 09:31 PM
Edited by utahnerf, 17 December 2010 - 09:34 PM.
#6
Posted 17 December 2010 - 09:47 PM
This is called temperature shocking. If the glue is weak enough, boiling might be all you need. Leave the gun in your freezer or ice box overnight. When you're ready, boil a pot of water, pull it out of the freezer, and drop it straight into the water.If everything is glued together, you could possibly dip it in boiling water and remove the glue to access the plunger ...
You could also do it backwards if you lived in a snow-covered area. (Hot first, then cold.) This might be bad for plungers and other rubber parts, because they will melt/crack.
If you can find a heat gun, then you could focus on the seams, and maybe protect the gun better.
Or you could just do what Utahnerf said, put a barrel on it in ten minutes without opening it up.
#7
Posted 17 December 2010 - 11:09 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users