Edit: Okay first of all I did look around. All the other bows have springs and catches. This one does not.
Edited by HappyHalloween, 27 November 2010 - 08:02 PM.
Posted 27 November 2010 - 07:52 PM
Edited by HappyHalloween, 27 November 2010 - 08:02 PM.
Posted 27 November 2010 - 07:57 PM
Posted 27 November 2010 - 08:00 PM
Posted 27 November 2010 - 08:28 PM
Posted 27 November 2010 - 08:36 PM
Posted 27 November 2010 - 08:40 PM
Posted 27 November 2010 - 08:42 PM
1. Glue a 1/2" PVC cross on your NF plunger tube as if it were a normal coupler.
2. Use epoxy putty to plug up two equal-length 1/2" PVC segments for bow arms.
3. Goop or cement the bow arms onto the cross.
4. Add string.
5. Cut a 3/4" or so segment of 1/2" PVC. Shove a 3" length of 1/2" CPVC into the PVC so about 1-1/2" protrudes from the end.
6. Goop or cement the PVC into the cross.
QED
Edited by Ice Nine, 27 November 2010 - 08:52 PM.
Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)
But Zeke guns tend to be like proofs by contradiction
Theoretically solid but actually non-constructive
Rnbw Cln
Posted 27 November 2010 - 09:00 PM
industrial designer
Posted 27 November 2010 - 10:11 PM
Posted 27 November 2010 - 10:15 PM
Edited by NerfGeek416, 27 November 2010 - 10:17 PM.
Posted 27 November 2010 - 11:03 PM
How can I make this any simpler? THERE IS NO SPRING IN THE ONE IN THE PICTURE. THERE IS NO CATCH EITHER.
Posted 27 November 2010 - 11:36 PM
Posted 28 November 2010 - 12:27 AM
Pretty simple write up done a few years ago.
http://nerfhaven.com.....e finder&st=0
Posted 28 November 2010 - 07:44 AM
0 members, 0 guests, 0 anonymous users