I thought it would be cool to have a clip for a Nite Finder but it seemed to complicated so I'm throwing the idea out here in case anyone wants to try and do a mod like that.
Nf Mod
Started by hellsangel, Apr 18 2004 12:51 PM
4 replies to this topic
#1
hellsangel
-
- Members
- 154 posts
Member
Posted 18 April 2004 - 12:51 PM
What would the robit do? Frame someone! -Futurama
I have 7 kids.
7!? Lady I love my cigar, but I take it out of my mouth once and a while!-Groucho Marks(The End of Live TV)
I have 7 kids.
7!? Lady I love my cigar, but I take it out of my mouth once and a while!-Groucho Marks(The End of Live TV)
#2
CustomSnake202
-
- Members
- 506 posts
Member
Posted 20 April 2004 - 07:31 PM
I just made a clip for my NF and I was only going to put it on my site. But then I saw this topic, so I guess I'll post a pic. Say hello to Juanita!
I saved the barrels that I sawed off my At3k and nocticed that they fit micro stefans very well. Then, I took out the X's in the back of them and took out the pegs. The back of the barrel fits over 9/16 brass pretty well, but it has a nice, snug fit with a little masking tape wrapped around it. I tried it out on my nitefinder and I was surprised by the results. I placed the barrel over my NF's brass barrel ( with a little masking tape on it) and fired it. If you push in the darts a little, the range will stay the same, 50' flat and 70' angled. I only had three At3k barrels cleaned out, but you could use all six if you want. I love this clip, especially because there is no decrease in range.
I saved the barrels that I sawed off my At3k and nocticed that they fit micro stefans very well. Then, I took out the X's in the back of them and took out the pegs. The back of the barrel fits over 9/16 brass pretty well, but it has a nice, snug fit with a little masking tape wrapped around it. I tried it out on my nitefinder and I was surprised by the results. I placed the barrel over my NF's brass barrel ( with a little masking tape on it) and fired it. If you push in the darts a little, the range will stay the same, 50' flat and 70' angled. I only had three At3k barrels cleaned out, but you could use all six if you want. I love this clip, especially because there is no decrease in range.
#3
THIRST
-
- Members
- 1,099 posts
Member
Posted 20 April 2004 - 08:20 PM
Basically, you made a turret out of barrels? Not exactly a clip...
There is a decrease in range...A properly modded nf should get about 70 feet flat.
THIRST
especially because there is no decrease in range.
There is a decrease in range...A properly modded nf should get about 70 feet flat.
THIRST
ko
#4
moosenukem
-
- Members
- 405 posts
Member
Posted 21 April 2004 - 08:21 PM
[quote name='THIRST' date='Apr 20 2004, 05:20 PM'] [/QUOTE]
There is a decrease in range...A properly modded nf should get about 70 feet flat.
THIRST [/quote]
How can you guys get 70' flat out of a Nf????? I only get 50' angled. I use cpvc is it the barrel type or the dart type??
There is a decrease in range...A properly modded nf should get about 70 feet flat.
THIRST [/quote]
How can you guys get 70' flat out of a Nf????? I only get 50' angled. I use cpvc is it the barrel type or the dart type??
#5
cxwq
-
- Founders
- 3,634 posts
Member
Posted 21 April 2004 - 08:38 PM
(This isn't a knock on you, because I agree with your general observation)A properly modded nf should get about 70 feet flat.
I would change that to read:
A NF properly modded for maximum range should get about 70 feet flat.
There are numerous reasons why someone might want to mod a pistol so that it doesn't achieve maximum range. My SSII is easily capable of 70' flat but in current form it only does 60' flat because I wanted optimal reliability and accuracy.
<meta name="cxwq" content="mostly water">
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
