Has Anyone Considered Of Doing This:
Posted 30 September 2010 - 11:42 AM
the idea i came up with was to make a lever action rifle out of a Rapid Fire Trek Six (made by buzzbee toys) now parts that uses a n-strike clip (or simular function of just useing just darts instead of darts and shells). the idea would be to replace the plunger, tubve and barrel of the rifle as well as making a new part for the cocking mechanism. the part in particular is the one with the two O-rings, cutting back a little bit before the hole where the air gets pushed in and adding a modified shell to hold the dart. the shell used would have to be cut to make a slot, and would also have to start far enough back to have the dart enter properly. i'm thinking of useing the shells you get with the riffle with the peg drilled out. if i remember correctly i used a 5/32 drill bit or was it a 5/16... anyway i don't know what to use for replacements for the barrel, plunger, and plunger tube, though you'd probably have to either modify the orrigenal plunger or make a new one that is the same shape or as close to it as you can. i'll add more detail as i continue to think this out.
Posted 30 September 2010 - 12:06 PM
Edited by qwertyupp, 30 September 2010 - 12:07 PM.
Posted 30 September 2010 - 12:23 PM
Edited by Necrose, 30 September 2010 - 12:24 PM.
Posted 30 September 2010 - 12:35 PM
This is the very deffinition of a concept thread, and we do not allow them here.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users