I'm not sure if this has been done before, but here it is.
First, take your three magazines and place them a little more than one inch apart, and put a one inch block of wood in between them, as shown in the picture. (I used normal clips in this pic, but its the same as extended clips)
Place the blocks where the white and red rectangles are. You may want to double sided tape them in place, but this is optional.
Then wrap tape (I used electrical, because it looks best) around the clip starting from the ridge near the top and traveling about 3-4 inches down. You can also wrap tape between the clips to close everything in. When finished, it should look like this:
When put in the gun, it looks like this:
An easy, yet effective, mod. Questions or comments?
Edited by Floppyjack, 09 September 2010 - 06:49 PM.