Jump to content


Photo

Help!


8 replies to this topic

#1 thedom21

thedom21

    Member

  • Members
  • 462 posts
  • Location:Saint Paul MN
  • State:Minnesota
  • Country:United States

Posted 18 July 2010 - 05:50 PM

So I tried to do General Cole's no shells doubleshot mod but when I load the darts and shoot nothing comes out of the barrel then when I prime it and shoot again they go about 7 feet. What is wrong and how do I fix it?
  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo

#2 Wes7143

Wes7143

    Member

  • Members
  • 758 posts
  • Location:Maine
  • State:Maine
  • Country:United States

Posted 18 July 2010 - 05:51 PM

Your barrels are too long, and/or your seal from the plungers to the barrels is terrible.
  • 0
QUOTE(VengefulWaffle)
Get off my boyfriend


If at first you don't succeed, add more epoxy.

#3 thedom21

thedom21

    Member

  • Members
  • 462 posts
  • Location:Saint Paul MN
  • State:Minnesota
  • Country:United States

Posted 18 July 2010 - 05:56 PM

Well I tried pulling the pvc/cpvc insert thingy out more and gluing it in but it still did the same thing. How do I improve the seal and what is a good barrel length?
  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo

#4 Broderick

Broderick

    Member

  • Members
  • 279 posts
  • Location:Olympia, WA

Posted 18 July 2010 - 05:58 PM

Well I tried pulling the pvc/cpvc insert thingy out more and gluing it in but it still did the same thing. How do I improve the seal and what is a good barrel length?

Probably 4 or 5 inches should be fine for the DS. To improve the seal I would slowly close the break action part, and try to see if the foam plates (not sure what to call them), touch the CPVC. Try replacing it with a rubber washer, or something like that.
  • 0

#5 thedom21

thedom21

    Member

  • Members
  • 462 posts
  • Location:Saint Paul MN
  • State:Minnesota
  • Country:United States

Posted 18 July 2010 - 06:05 PM

Well I tried pulling the pvc/cpvc insert thingy out more and gluing it in but it still did the same thing. How do I improve the seal and what is a good barrel length?

Probably 4 or 5 inches should be fine for the DS. To improve the seal I would slowly close the break action part, and try to see if the foam plates (not sure what to call them), touch the CPVC. Try replacing it with a rubber washer, or something like that.

My barrels are 3 inches long so I will try fixing the seal.
  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo

#6 Spud Spudoni

Spud Spudoni

    Member

  • Members
  • 314 posts
  • Location:SC and student at Auburn University
  • Country:United States

Posted 18 July 2010 - 07:06 PM

Did you even read the responses on that thread? Keef and others tried to do this mod. None of theirs worked. Cole had a certain Double Shot that worked perfectly for the mod. I think you may have just screwed your double shot.
  • 0

industrial designer


#7 thedom21

thedom21

    Member

  • Members
  • 462 posts
  • Location:Saint Paul MN
  • State:Minnesota
  • Country:United States

Posted 18 July 2010 - 08:32 PM

Did you even read the responses on that thread? Keef and others tried to do this mod. None of theirs worked. Cole had a certain Double Shot that worked perfectly for the mod. I think you may have just screwed your double shot.

But Cole said he had done it to 3 doubleshots not just one.
  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo

#8 Spud Spudoni

Spud Spudoni

    Member

  • Members
  • 314 posts
  • Location:SC and student at Auburn University
  • Country:United States

Posted 18 July 2010 - 08:39 PM

Which type of Double Shot are you using? He also said the darts have to fit LOOSE. Look at the thread, read the responses, they will help you figure out what to do.
  • 0

industrial designer


#9 thedom21

thedom21

    Member

  • Members
  • 462 posts
  • Location:Saint Paul MN
  • State:Minnesota
  • Country:United States

Posted 18 July 2010 - 08:53 PM

I think I am going to just screw this and try and make my own variation of Phree Agent's mod. Also I am so stupid I only read like 2 pages and heard it was a good mod but didn't read the whole post. Does anyone know of any tanks that are like the Deluge? If anyone has the springs that eject the shells out please pm me so I could fix my Ds because I removed the orange pieces without cutting or damaging them in any way.

Edited by thedom21, 18 July 2010 - 09:00 PM.

  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users