Jump to content


Photo

Mcmaster-carr Catalog

4,000 pages of what we know and love

11 replies to this topic

#1 HOTH

HOTH

    Member

  • DO NOT TRADE
  • 557 posts

Posted 29 June 2010 - 10:07 PM

I found this sitting in my garage today.


Posted Image
-

Posted Image

Apparently my dad used to use McMaster a lot for his work. I was pretty excited, having never seen this before. I figured I'd post it here because it contains everything that the website has. Everything. In 4,000 pages. I searched and found nothing, so I found it appropriate to post. It has part numbers and sizes;

Posted Image

And a long ass index;

Posted Image

This thing is definitely helpful for finding specific parts. Can't wait to test it out.

Edited by HOTH, 29 June 2010 - 10:20 PM.

  • 0
My YouTube

Solved the Rubik's Cube in 46 seconds

"Nobody understands quantum mechanics" - Richard Feynman

#2 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 824 posts

Posted 29 June 2010 - 10:22 PM

These aren't big pics at all, you're just fine.

I love these things; my dad has one in the basement I use during modding (the "I want to this, what parts could do this...AHA! I'll use that!" usage). There's one at work, too, which is also nice for brainstorming. These things seriously make my life easier...
  • 0

#3 HOTH

HOTH

    Member

  • DO NOT TRADE
  • 557 posts

Posted 29 June 2010 - 10:23 PM

These aren't big pics at all, you're just fine.

I love these things; my dad has one in the basement I use during modding (the "I want to this, what parts could do this...AHA! I'll use that!" usage). There's one at work, too, which is also nice for brainstorming. These things seriously make my life easier...

Yea, I realized after posting that all pics were set at medium, not large. Whoops. Guess I need to preview my stuff. Yea, these are great.
  • 0
My YouTube

Solved the Rubik's Cube in 46 seconds

"Nobody understands quantum mechanics" - Richard Feynman

#4 Zorns Lemma

Zorns Lemma

    Sir Scrt

  • Moderators
  • 1,277 posts

Posted 29 June 2010 - 10:44 PM

The entire catalog is online. I usually browse McMaster via searching for catalog pages: it's a good compromise between speed and breadth of information delivered.
  • 0
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#5 HOTH

HOTH

    Member

  • DO NOT TRADE
  • 557 posts

Posted 29 June 2010 - 10:46 PM

The entire catalog is online. I usually browse McMaster via searching for catalog pages: it's a good compromise between speed and breadth of information delivered.

Yeah, I can imagine that is a ton easier than flipping through 4,000 pages. I just thought this was sort of a cool find.
  • 0
My YouTube

Solved the Rubik's Cube in 46 seconds

"Nobody understands quantum mechanics" - Richard Feynman

#6 burning-ice

burning-ice

    Member

  • Members
  • 65 posts

Posted 30 June 2010 - 07:43 PM

I found this sitting in my garage today.


Posted Image
-

Posted Image

Apparently my dad used to use McMaster a lot for his work. I was pretty excited, having never seen this before. I figured I'd post it here because it contains everything that the website has. Everything. In 4,000 pages. I searched and found nothing, so I found it appropriate to post. It has part numbers and sizes;

Posted Image

And a long ass index;

Posted Image

This thing is definitely helpful for finding specific parts. Can't wait to test it out.

Yeah I have one too. It helps alot when I need material. I use the snap on pvc tees on page 67 for my snapbow rail. They save time.
  • 0
I lurk alot.
If I double post blame my internet, I apologize.

#7 ZimZam93

ZimZam93

    Member

  • Members
  • 38 posts

Posted 07 August 2010 - 11:53 PM

i have never seen or heard of these, could someone explain quickly how they work? im confused as to how you can use it to find pieces?
  • 0
Become Legendary

Everyone knew it would suck...we just didn't know it would suck this much

#8 Broderick

Broderick

    Member

  • Members
  • 279 posts

Posted 08 August 2010 - 12:33 AM

i have never seen or heard of these, could someone explain quickly how they work? im confused as to how you can use it to find pieces?

...
It's a book.
It has part numbers listed in an order.
You find what you need and buy it.


Cool find. Has McMaster been around a long time? I would think before the internet took off people would probably get a catalog like this and call in? I suppose a better question would be, how old is this one?
  • 0

#9 VelveetaAvenger

VelveetaAvenger

    Member

  • Members
  • 630 posts

Posted 08 August 2010 - 12:43 AM

i have never seen or heard of these, could someone explain quickly how they work? im confused as to how you can use it to find pieces?


In the dark ages, before the first lolcats even dreamed of hazing cheeseburgers, people had to hike to their local libraries. Often a man had to go uphill both ways, because downhill had not been invented yet. After a long grueling journey, a librarian (a sort of "reality" moderator who liked to yell at people for bothering her, [History is always doomed to repeat itself!]) would show you to the section of the library covering your topic. Or if she was hung over from drinking at home with only her cat to keep her company she would berate you for not knowing the dewy decimal system. Once you had judged a selection of likely books by their covers, you would take them to a table (a sort of computer desk that people used before computers were allowed to immigrate here from Japan) and page through the table of contents and the index until you actually found what you needed. It could take whole minutes at a time!!! And that was before the page "loaded" up for you to even read the information! It was a dark time, full of grunge music and maybe even a little Backstreet Boys if your library was especially poor.

Seriously though, there are really people out there who don't know how to look stuff up in a book? I think you need to switch schools. My namesake, Derek Zoolander just opened up a fine facility for you to apply to!

Edit: Beaten! Just because I can't type fast and stuff...

Edited by VelveetaAvenger, 08 August 2010 - 12:45 AM.

  • 0
"I never saw Beastmaster, I just wanted to be cool..."

#10 ZimZam93

ZimZam93

    Member

  • Members
  • 38 posts

Posted 08 August 2010 - 10:09 AM

i have never seen or heard of these, could someone explain quickly how they work? im confused as to how you can use it to find pieces?


In the dark ages, before the first lolcats even dreamed of hazing cheeseburgers, people had to hike to their local libraries. Often a man had to go uphill both ways, because downhill had not been invented yet. After a long grueling journey, a librarian (a sort of "reality" moderator who liked to yell at people for bothering her, [History is always doomed to repeat itself!]) would show you to the section of the library covering your topic. Or if she was hung over from drinking at home with only her cat to keep her company she would berate you for not knowing the dewy decimal system. Once you had judged a selection of likely books by their covers, you would take them to a table (a sort of computer desk that people used before computers were allowed to immigrate here from Japan) and page through the table of contents and the index until you actually found what you needed. It could take whole minutes at a time!!! And that was before the page "loaded" up for you to even read the information! It was a dark time, full of grunge music and maybe even a little Backstreet Boys if your library was especially poor.

Seriously though, there are really people out there who don't know how to look stuff up in a book? I think you need to switch schools. My namesake, Derek Zoolander just opened up a fine facility for you to apply to!

Edit: Beaten! Just because I can't type fast and stuff...


haha that was entertaining, so if i needed somesort of spring for a longshot i could look it up in there and it would tell me where to buy it?
  • 0
Become Legendary

Everyone knew it would suck...we just didn't know it would suck this much

#11 Collective

Collective

    Member

  • Members
  • 103 posts

Posted 08 August 2010 - 11:13 AM

I think the problem is that he's never heard of Mcmaster. It's a company that sells hardware and building materials. It's where a lot of people on this site get their modding/home made materials because you can find very specific parts that a local hardware store wouldn't carry. They have a website that everybody knows about, but apparently they have a catalog too, which is what this topic is about.
  • 0
"A lot" is two words.

#12 ZimZam93

ZimZam93

    Member

  • Members
  • 38 posts

Posted 09 August 2010 - 04:38 PM

I think the problem is that he's never heard of Mcmaster. It's a company that sells hardware and building materials. It's where a lot of people on this site get their modding/home made materials because you can find very specific parts that a local hardware store wouldn't carry. They have a website that everybody knows about, but apparently they have a catalog too, which is what this topic is about.


okay! thank you. i have never heard of Mcmaster so yea, thats the problem but i will for sure have to check them out now, because my local hardware stores lacks in the nerf modding department
  • 0
Become Legendary

Everyone knew it would suck...we just didn't know it would suck this much


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users