5 replies to this topic

[sidamazo]

I'm working on my big blast and I singled it at first, but I already have a singled megamissle which is smaller and has same ranges.
I decided to coupler a turret onto it.. I don't have a real coupler, so i'm using a 3-inch piece of CPVC. It fits perfectly on the rear of the turret, and I hot glued it to the end of the tank.

I can only use tape and I used up my store of hotglue, so there's no more adhesive. Would the turret/CPVC combo be too heavy and just break off?

Edit: I's are fixed.

Edited by sidamazo, 19 May 2010 - 07:30 PM.

[CaptainSlug]

You are using "I" as a pronoun but failing to capitalize it consistently. Please correct that oversight from now on.

[jaybo1996]

If you only have tape and hotglue, then that's allready too much wieght. You need stronger glue, I recomend
J-B weld Epoxy.

[Draconis]

I recommend something better than epoxy putty. Like PVC or ABS solvent weld.

[sidamazo]

I doubt I'd be able to get my hands on solvent weld, but i can probably get epoxy. Thanks

[Hi Yah]

Use JB Weld. You can find it in a lot of stores.