Putting A Lock N Load Back Together
#1
Posted 03 April 2004 - 07:06 PM
Here's pictures of what the inside looks like for reference.
Specifically, I can't figure out how to fit together the plunger with the main spring on it, the cover for the plunger, the trigger, and what he calls the 'catch spring'. Also, I notice a spring on one of the rods extending from the trigger, but I have only one loose spring on the outside, I'm assuming I must have lost it while opening the gun... is this necessary, and if so where could I find a replacement?
Thanks a lot for your help,
-Funkii
#2
Posted 03 April 2004 - 07:29 PM
#3
Posted 04 April 2004 - 01:07 AM
#4
Posted 04 April 2004 - 01:11 AM
#5
Posted 04 April 2004 - 01:36 AM
Thanks a lot!
#6
Posted 04 April 2004 - 01:43 AM
The catch is the rectangular piece that moves up through the little hole in the plunger tube and catches on the groove on the bottom of the plunger.
The top bar of the trigger pushes on a mini ramp inside the catch and causes it to lower which allows the plunger to move forward.
It's basically the opposite of what I had just told you.
#7
Posted 04 April 2004 - 02:00 AM
#8
Posted 04 April 2004 - 02:07 AM
#9
Posted 04 April 2004 - 11:27 AM
Funkii, congrats on your mod and welcome to nerfhaven. The lockn' load is a great gun, I'm sure you'll enjoy it.
Don't forget to eat your meat based vegetable substitute children.
#11
Posted 04 April 2004 - 05:58 PM
does anyone have any better ideas? I was considering some sort of rubber handle but I don't really have access to any rubber so I'm not sure if that would work.
#12
Posted 04 April 2004 - 06:05 PM
With my experience, it's pretty easy to tape/glue the key ring on. Before my plunger broke, I had the ring plumber's gooped onto the plunger. If you don't want to do that, you could just have the key ring on your finger, and everytime you cock it, just use the keyring and then take it off. Basically, the key ring stays on your finger at all times, like an extension to your hand. It worked for me for a little while, then I just glued it on instead.hmm, one last question for you all: I've seen in various places that a key ring is reccommended for cocking the gun after the top has been taken off, but I find that when the gun is fired the key ring flies off if it is still on the plunger. I can cock it with just my fingers but it's somewhat inconsistent and less than comfortable...
does anyone have any better ideas? I was considering some sort of rubber handle but I don't really have access to any rubber so I'm not sure if that would work.
Not in the game anymore, but it was great while it lasted. Thanks for the great years of fun, NH!
--
Resident "Spawn of Talio"
#13
Posted 04 April 2004 - 06:08 PM
#14
Posted 04 April 2004 - 07:33 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users