6 replies to this topic

[dmactheballer]

So I found that even after modding my guns so they will shoot 50 feet, i am dissatisfied due to their poor accuracy. If aiming at one place the entire time from 25 feet away, i will get a spray of hits about the area of a window. Does anybody know anything i can do to the darts or guns to improve accuracy? My main problems are with the guns that use clips (The Longstrike is worst).

[cheerios]

O.K. I'll give you a hint for better accuracy don't use streamlines. They're under weighted and don't fly straight.

[dmactheballer]

O.K. I'll give you a hint for better accuracy don't use streamlines. They're under weighted and don't fly straight.

So use what instead? Stefans?

[jakejagan]

Yes, use stefans because they are many times more accurate and are actually cheaper than buying darts from the store.

[sistermol]

The reason your getting an awful grouping could be because you removed the air restrictor.
It happened to me with my nitefinder when I removed them.

I think its just from the added power you get when you remove them it makes the blaster jump a little in your hand.

I could be wrong though this is just my theory.

[nate the great]

If you modded the gun you need to use stefans. Here is the guide to make felt+washer stefans. If you use stock darts they will fly everywhere because they are too light.

[Foam Ninja]

Also if your real fond of using your stream lines. Try adding a single bb to the end. This, I found, greatly improves accuracy.