What units are you guys measuring with this? I was trying to modify my longshot to work as a breech (using only PVC, I can't get my hands on brass tubing,) and it wouldn't fit through the tubing that has the plunger in it that pushes the air into the barrel. The hole was too small. So I was curious as to what units you are measuring the PVC diameter in, because I want to find the right materials.
Any other help, concerning the longshot, would be greatly appreciated.
1/2 Size Pvc Tubing?
Started by Winguh, Apr 26 2010 08:20 PM
-
This topic is locked
10 replies to this topic
#3
Zorns Lemma
-
- Moderators
- 1,277 posts
Sir Scrt
Posted 26 April 2010 - 08:26 PM
What units are you guys measuring with this? I was trying to modify my longshot to work as a breech (using only PVC, I can't get my hands on brass tubing,) and it wouldn't fit through the tubing that has the plunger in it that pushes the air into the barrel. The hole was too small. So I was curious as to what units you are measuring the PVC diameter in, because I want to find the right materials.
Any other help, concerning the longshot, would be greatly appreciated.
1/2" PVC Pipe has an outer diameter of .844".
1/2" PVC Tube has an inner diameter of .5"
Edited by Zorn's Lemma, 26 April 2010 - 08:27 PM.
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)
Kruger and Dunning (1999)
#4
jaybo1996
-
- Members
- 110 posts
Member
Posted 26 April 2010 - 08:30 PM
PVC tubing varies widley when it comes to internal diameter. But as a rule of thumb, the outside diameter of 1/2 inch PVC is approxamatly 3/4 inch; the inside is generally 3/5 of an inch.
Edited by jaybo1996, 26 April 2010 - 08:30 PM.
01:15 N9> The problem with nerfers: We're around plastic. Plastic contains estrogenic compounds, so we're more feminine than the rest of the world.
WTF, are you in Tony Stark's basement!?'
#5
Winguh
-
- Members
- 3 posts
Member
Posted 26 April 2010 - 08:36 PM
Can someone fill in what the width of the tubing itself is? That would be greatly appreciated.
#6
Fredo
-
- Members
- 65 posts
Member
Posted 26 April 2010 - 08:46 PM
Can someone fill in what the width of the tubing itself is? That would be greatly appreciated.
Uh, .344" according to Zorn's measurements.
22:24 Mr_BadWrench wait, you have a name that makes it possible for talio to seduce a woman?
22:25 Mr_BadWrench whats your name? john holmes?
22:25 Mr_BadWrench whats your name? john holmes?
#7
unTrained NERFER
-
- Members
- 127 posts
Member
Posted 26 April 2010 - 09:06 PM
Where the hell did you see 3.44? Probably a typo...
Can someone fill in what the width of the tubing itself is? That would be greatly appreciated.
Uh, .344" according to Zorn's measurements.
First we need to know what size tubing it is. It's really not that hard, for example:
1/2" pvc= OD: .844"
3/4" pvc= ID: .75"
Therefore 1/2" pvc will not fit inside 3/4" pvc and so on and so forth.
Edited by unTrained NERFER, 26 April 2010 - 09:07 PM.
QUOTE
IceNine
QUOTE
balls, in three different colors. I don't remember the exact number, but I'm sure Ryan or Zorn does.
#8
moosa
-
- Members
- 243 posts
Member
Posted 26 April 2010 - 09:08 PM
It would be important to specify/figure out whether you're talking about PVC pipe or tubing.
Yes.
#9
Winguh
-
- Members
- 3 posts
Member
Posted 26 April 2010 - 09:12 PM
Then what exactly is the difference between piping and tubing?
#11
VACC
-
- Founders
- 3,265 posts
Vacc is Legend
Posted 26 April 2010 - 09:39 PM
Untrained nerfer is correct. These are things you can find by doing a little of your own research. Such an investigative exercise would benefit you in your stay here.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
