Nitefinder Replacement O-ring
#1
Posted 13 April 2010 - 03:35 PM
be the same even if I wen't to another store.
Thanks alot
~Tyler
#2
Posted 13 April 2010 - 03:50 PM
#3
Posted 13 April 2010 - 03:52 PM
Thanks but I know that. I'm looking for the o-ring size for a upcomeing plunger head project.Wrap a bit of electrical tape around the plunger head in the slot that holds the O-ring in place. It should expand the O.D. of the O-ring, instant better seal. Just as good as a replacement.
#4
Posted 13 April 2010 - 03:57 PM
Just take the O-ring to the store with you. Lowes has a size chart laminated on the wall that you can literally press the o-ring up against to compare sizes. I think you're looking for a #12 or #13 O-ring though.Thanks but I know that. I'm looking for the o-ring size for a upcomeing plunger head project.Wrap a bit of electrical tape around the plunger head in the slot that holds the O-ring in place. It should expand the O.D. of the O-ring, instant better seal. Just as good as a replacement.
#5
Posted 13 April 2010 - 04:09 PM
If I had a nitefinder o-ring I would do that but I don't. Thanks for the #s that's exactly what I needed!Just take the O-ring to the store with you. Lowes has a size chart laminated on the wall that you can literally press the o-ring up against to compare sizes. I think you're looking for a #12 or #13 O-ring though.
#6
Posted 13 April 2010 - 06:55 PM
Solved the Rubik's Cube in 46 seconds
"Nobody understands quantum mechanics" - Richard Feynman
#7
Posted 13 April 2010 - 09:47 PM
Edited by Brutal_770, 13 April 2010 - 09:48 PM.
If I put ads on NerfHaven you'll know it. They'll be for drugs... and hookers... and duct tape.
By Cxwq
#8
Posted 13 April 2010 - 10:39 PM
Danco #57 is 1" OD, 13/16" ID. The #14 is 15/16"OD, 3/4 (12/16)" ID. The #57 might be better, but the #14 works just fine and is a little snugger.
Sorry for the mis-information.
Edited by nostyleguy, 13 April 2010 - 10:40 PM.
#9
Posted 17 April 2010 - 06:55 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users