Little Bit Of A Raider Issue.
#1
Posted 05 April 2010 - 08:21 PM
Anyways, I took out the AR's, and put it back together. I tried to prime it, and on the way back, the bolt (dart tooth? I don't know if these are the right names) wouldn't fit into the thing it goes into. (black circle doesn't fit into green circle)
http://img205.images.../3021/helpp.png
Anyways, I took it part again, and I realized it was because the tooth and bolt was too low, and it got stuck on something. By low, I mean, if you were to lie the unassembled gun on a table, the tooth would be too close to the table to fit. If I force the tooth a bit higher, it fits in fine. I think I put the gun together correctly, and the back of the plunger is in the right place, I think, so I don't think that's the issue. Any help?
#2
Posted 05 April 2010 - 09:53 PM
I already looked through a few Raider threads, and didn't notice this issue, but if it's been answered elswhere, sorry.
Anyways, I took out the AR's, and put it back together. I tried to prime it, and on the way back, the bolt (dart tooth? I don't know if these are the right names) wouldn't fit into the thing it goes into. (black circle doesn't fit into green circle)
http://img205.images.../3021/helpp.png
Anyways, I took it part again, and I realized it was because the tooth and bolt was too low, and it got stuck on something. By low, I mean, if you were to lie the unassembled gun on a table, the tooth would be too close to the table to fit. If I force the tooth a bit higher, it fits in fine. I think I put the gun together correctly, and the back of the plunger is in the right place, I think, so I don't think that's the issue. Any help?
Im not fully understanding your explination, but I'll take a shot at it.The pic shows the breech pulled back and if you are assembling it in that fashion, it could be problematic. I would suggest assembling it with breech closed so it alligns its self when you put it back together. Have you tried that?
#3
Posted 06 April 2010 - 07:32 AM
I already looked through a few Raider threads, and didn't notice this issue, but if it's been answered elswhere, sorry.
Anyways, I took out the AR's, and put it back together. I tried to prime it, and on the way back, the bolt (dart tooth? I don't know if these are the right names) wouldn't fit into the thing it goes into. (black circle doesn't fit into green circle)
http://img205.images.../3021/helpp.png
Anyways, I took it part again, and I realized it was because the tooth and bolt was too low, and it got stuck on something. By low, I mean, if you were to lie the unassembled gun on a table, the tooth would be too close to the table to fit. If I force the tooth a bit higher, it fits in fine. I think I put the gun together correctly, and the back of the plunger is in the right place, I think, so I don't think that's the issue. Any help?
I had the same problem. I don't remeber how exactly I fixed it. But it took me less than an hour.
Just fadoodle with the internals and try and see whats in the way. Look at internal pictures if you have to.
#4
Posted 06 April 2010 - 11:56 AM
#6
Posted 06 April 2010 - 04:22 PM
There is a picture dumbass.Pictures would really fucking help.
#7
Posted 06 April 2010 - 09:36 PM
There is a picture dumbass.Pictures would really fucking help.
Not one of his gun.
And your Nerf guns closer.
External Modification contest, check it out!
QUOTE
Using anything I write as a sig makes your penis shoot rainbows. Bitches LOVE rainbows
^^VACC
#8
Posted 07 April 2010 - 06:41 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users