Jump to content


Photo

Belt Blaster Rebarreling

a lesser known blaster made great

10 replies to this topic

#1 Rylan

Rylan

    Member

  • Members
  • 19 posts

Posted 04 April 2010 - 09:09 PM

i bought a belt blaster and wondered why there arent to many mods online for it, and that's why I am rebarreling it to shoot much further than normal.

btw, READ ALL OF THIS BEFORE POSTING A COMMENT

For this mod you need:
-belt blaster
-barrel material that will fit your darts, I used 1/2 inch cpvc after i did this post
-thin wall 1/2 inch pvc sch. 20 i think?
-hot glue
-extra springs if wanted
-screw driver, hammer, hot glue gun, E tape
-fingers would be helpful

Posted Image

first, unscrew your gun, duh
and like always, there is a hidden screw under the pump, and another thing, the pump doesn't come off the rest of the shell so don't act like me and try to rip it off
Posted Image

before we proceed, take these pieces out, we don't need/want them
Posted Image

grab the plunger and start by putting a screw driver in the top of it
Posted Image

and hammer out this piece, this is just one option but you can do something else to get it out
Posted Image

now take the spring off of it
Posted Image

glue your barrel to the plunger
Posted Image

i put foam on the end of the plunger from the darts we will no longer be using
Posted Image

notice that the original barrel that the darts traveled through holds 1/2 inch pvc really well, so you can put E tape on it to give it a nice fit and do the same for the cpvc or whatever you are using so it fits in the pvc
then put everything back together and if done correctly, it should look like this...
Posted Image
Posted Image
cut the barrels to fit if you havent done so yet
TADA
the stock ranges were:
flat
21'
16'
28'
19'
16'
angled
30'
32'
35'
37'
29'

the ranges now are:
flat
40'
45'
43'
49'
41'
angled
79'
81'
88'
85'
80'

average:
before
-flat=20'
-angled=33'

after
-flat=44'
-angled=83'


it performs nicely and if you want, you can put a breech or a coupler in the the spot the belts went in



my friends dont like it so i have no use for it
you can make an offer and if its reasonable, i will send it to you
dont post the offer here though just pm me

READ THIS
I know the pictures are to big, so how do i fix it
I know I destroyed the rof, I have two so it was either this or never use it

Edited by Rylan, 05 April 2010 - 07:12 AM.

  • 0
I ride my bicycle everywhere
Because I can

#2 utahnerf

utahnerf

    Member

  • Members
  • 339 posts

Posted 04 April 2010 - 09:27 PM

Looks like a good mod, but I believe that it could be modded further than this. Second thing I have to say is make your pictures smaller. Seriously, someone could easily miss something because of your huge pictures.
  • 0

#3 crazyjeremy14

crazyjeremy14

    Member

  • Members
  • 32 posts

Posted 04 April 2010 - 09:51 PM

I don't agree with this mod, because you are taking something with a great RoF and decreasing it immensely. I like your idea, but on this gun, you can simply add a spring, remove the ARs on the shells, and make the hole in the plunger tube a bit bigger (like you did) and keep the belt, and have a fine balance between RoF and range. In my opinion, extremities are no good.

Thats just my two cents on this mod. Other than that, good job on the writeup, but next time adjust the pics.

~Jeremy

Edited by crazyjeremy14, 04 April 2010 - 09:53 PM.

  • 0

#4 Banshee

Banshee

    Member

  • Members
  • 668 posts

Posted 05 April 2010 - 12:20 AM

Oh my god, you just killed the only good part about this gun. You know I get those same ranges out of the box? I love my belt blaster, it destroys all in indoor wars. You just turned a $20 gun into an oversized rifle with the power of a nitefinder... You could've had 2 nitefinders. And everyone knows copper is a terrible barrel replacement.
  • 0
Like my page on Facebook! PM me, I do commissions!

#5 Vinnie D

Vinnie D

    Member

  • Members
  • 127 posts

Posted 05 April 2010 - 02:12 AM

Yeah, singling the belt blaster is kind of pointless unless you're going to replace the plunger tube with something like a longshot's or an air tank.

On the upside, if you kept the guts, you can freeze off hot glue and reverse this. If you do just want a single shot gun with the style of the Belt Blaster, you should at least use a coupler. You missed an easy opportunity to make a slide breech there.
  • 0

#6 pjotrkuh

pjotrkuh

    Member

  • Members
  • 259 posts

Posted 05 April 2010 - 06:31 AM

OMG I think everyone who destroys a perfectly good belt-blaster, just to single it, is crazy (I wanted to say:"deserves a lobotomie" But that a little rude), I mean you could have breeched a NF and get the same ranges................so why destroying the best function of a blaster?

Side Note: If you buy a blaster, destroy it like that, and want to make a write-up, you buy a decent camera, with a macro function.
And take some good, sharp and smaller pictures, that fit in the normal browser width (<= this rule should be in the COC........)

Edited by pjotrkuh, 05 April 2010 - 06:36 AM.

  • 0
When the shit hits the fan, you'd better wear a rain coat.....

#7 ultimatenerf 320

ultimatenerf 320

    Member

  • Members
  • 38 posts

Posted 05 April 2010 - 03:36 PM

Wow. Not only did you single it, but you used 1/2 copper as a barrel material. Then you said you used cpvc, and how long did you make it? If you made it the same length, major dead space. And I don't think you know that really does not improve your range. And I can make one with more range and still have the belt. This mod is like making a singled LS and the boltsled is still good.
  • 0
I am not Mr.fail, but I am just-ever-so-slightly-insane.
"don't srcew with me, I have badass sword-fighting skills."
FL wars are amazing and Effeminate.

#8 Brutal 770

Brutal 770

    Member

  • Members
  • 40 posts

Posted 05 April 2010 - 04:58 PM

I'm sorry, I don't mean to be mean, but while you did a good job of putting your idea on the gun... Your idea sucked

just sorry but it just wasn't the best idea, there were much simpler ways to get better ranges while keeping the auto feature
  • 0
QUOTE
It's an injection attack against this version of IPB. We'll be down intermittently while I upgrade the site.

If I put ads on NerfHaven you'll know it. They'll be for drugs... and hookers... and duct tape.


By Cxwq

#9 vicious foam

vicious foam

    Member

  • Members
  • 17 posts

Posted 06 April 2010 - 07:39 AM

I'm sorry, I don't mean to be mean, but while you did a good job of putting your idea on the gun... Your idea sucked

just sorry but it just wasn't the best idea, there were much simpler ways to get better ranges while keeping the auto feature



Well your name is brutal.
  • 0

#10 Zmandudesk82

Zmandudesk82

    Member

  • Members
  • 33 posts

Posted 06 April 2010 - 07:56 AM

Man, you guys are like a broken record. I don't think singling it is all that bad.

@Rylan: It's a good idea, but you could probably make it better. I would add a stronger spring, and create a better seal. I have never owned this gun before, but I'm sure both of those things would greatly improve the range. Other than that, good job. You took an idea, and made it real.

Edited by Zmandudesk82, 06 April 2010 - 08:01 AM.

  • 0
QUOTE(Coal Ten @ May 4 2010, 02:57 PM) View Post

simply because I love the feeling of nice hard wood between my fingers.

#11 Your nerf killa

Your nerf killa

    Member

  • Members
  • 35 posts

Posted 07 April 2010 - 11:46 AM

Jesus Christ I have a 20" monitor and I have to scroll to the side? Shit, please
resize your pictures.

Edited by Your nerf killa, 07 April 2010 - 11:47 AM.

  • 0
" Talio likes to eat his own shit. " crispy

" Okay, I have a few things to say:

1. My shit is glorious.
2. Sitting around at a computer all day eating chips is fucking awesome.
3. I liked how you called me big meany head. I'll use that one next time Vacc calls me a faggot. " Talio


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users