Jump to content


Photo

At3k ?


4 replies to this topic

#1 gizidemo

gizidemo

    Member

  • Members
  • 43 posts

Posted 26 March 2010 - 07:00 AM

If I am replacing the tank should I attach the new tube to the goo gage or the main tank
  • 0
QUOTE(cheerios @ May 16 2010, 04:41 AM)

How much for the quadshit.

#2 alberty

alberty

    Member

  • Members
  • 197 posts
  • Location:MD

Posted 26 March 2010 - 09:07 AM

If I am replacing the tank should I attach the new tube to the goo gage or the main tank


Why are you attaching tubing to the tank you are replacing?
  • 0

#3 gizidemo

gizidemo

    Member

  • Members
  • 43 posts

Posted 26 March 2010 - 11:58 AM

If I am replacing the tank should I attach the new tube to the goo gage or the main tank


Why are you attaching tubing to the tank you are replacing?


there is tubing attached to the tank so insted of cutting it of I am just going to just hook it up
  • 0
QUOTE(cheerios @ May 16 2010, 04:41 AM)

How much for the quadshit.

#4 alberty

alberty

    Member

  • Members
  • 197 posts
  • Location:MD

Posted 26 March 2010 - 02:04 PM

I meant that from your incorrect grammar, it sounds like you are trying to take out the AT3K's tank, and then attach tubing to it (the AT3K tank), which wouldn't make sense if you're trying to replace that tank.

Anyways, I believe the goo gauge is optional, so try whatever works. Either hook up the replacement tank through the goo gauge to the pump in the existing setup, or try to attach some other pump to see if the tank will work without the gauge. If you think about it, the goo gauge doesn't really do anything too significant, so it can be bypassed.

Attach tubing isn't a hard thing for these, so you could just try it before having to ask about it.

Edited by alberty, 26 March 2010 - 02:05 PM.

  • 0

#5 moosa

moosa

    Member

  • Members
  • 243 posts
  • Location:Bangor, ME

Posted 29 March 2010 - 08:06 AM

If you think about it, the goo gauge doesn't really do anything too significant, so it can be bypassed.

Removing the goo gauge won't effect the functionality of your blaster, so if you don't want it, you can get rid of it. However, I find them very useful for detecting/ruling out any air leaks, so if I were you, I would consider leaving it in if possible. I find it odd how so many people are so quick to yank them out and throw them in the trash.

Edited by moosa, 29 March 2010 - 08:06 AM.

  • 0
Yes.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users