Hello and welcome to my doubleshot modding guide. You can make a sexy gun in a day using this simple guide.
First thing you should do when your gun is fresh out of the pack is to cut off the barrel. Do this using a small saw or anything thats good for cutting large plastic. Afterwards, your gun should look like this.
I like to cut the gun behind the nail (look on the bottom) to add a little bit of barrel for that "sawn off" look.
Now you may paint the gun. use any color, but i really suggest the Krylon Fusion for plastic spray paint. It bonds with the plastic and looks awesome. It is $4 at Home Depot. to start unscrew the stock (this is the only screw you have to deal with!) and spray paint it and the plastic bolts seperatley from the gun. I used tape to cover up the trigger and a little hole on the bottom from which you can see the string (internals) and you probably dont want that to be touched. You may also want to stuff kitchen towel down each of the barrels, to prevent you from painting those.
Here is a pic of my gun halfway through the painting process. Notice the stock and bolts on the left.
3. While you wait 20 minutes inbetween coats you can use a small drill and put it through the back of each shell. make the hole a little bigger and take out that rod that the darts sit on. Now you can use stefans and have a bit more power. (You can use a nail and a hammer, although the drill is best for the cleaner cut.)
Here is a before and after of this mod.
Before on right, after on left.
4. Screw the stock back on when you are done. Now enjoy using your new Doubleshot.
This is my first Thread and second post, so leave some comments please!
Note: I will update pics with more quality and better shots if i can.
Edited by NerfKnack, 23 February 2010 - 04:54 PM.