For reference, I'm using a magstrike pump.
At3k Not Pumping Correctly
Started by soccerbeast003, Feb 22 2010 01:10 PM
2 replies to this topic
#1
soccerbeast003
-
- Members
- 206 posts
Member
Posted 22 February 2010 - 01:10 PM
I'll get straight to the point. Whenever the shell is closed, I have to pump it really fast to keep pressure in. Otherwise, it just escapes out the barrel. If the shell is open, it pumps perfectly fine. I've tried spraying silicone spray in it and no luck.
For reference, I'm using a magstrike pump.
For reference, I'm using a magstrike pump.
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?
Tony Stark: Absolutely ridiculous. I don't paint.
Tony Stark: Absolutely ridiculous. I don't paint.
#2
Ryan201821
-
- Contributors
- 1,892 posts
Prince Edward
Posted 22 February 2010 - 01:50 PM
Your trigger is too far back while in the resting position. It's holding the valve open even when the trigger isn't depressed.
Edited by Ryan201821, 22 February 2010 - 03:26 PM.
#3
soccerbeast003
-
- Members
- 206 posts
Member
Posted 22 February 2010 - 05:39 PM
Thank you, I loosened some screws and now it fires fine.Your trigger is too far back while in the resting position. It's holding the valve open even when the trigger isn't depressed.
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?
Tony Stark: Absolutely ridiculous. I don't paint.
Tony Stark: Absolutely ridiculous. I don't paint.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
