Jump to content


Photo

At3k Not Pumping Correctly


2 replies to this topic

#1 soccerbeast003

soccerbeast003

    Member

  • Members
  • 206 posts

Posted 22 February 2010 - 01:10 PM

I'll get straight to the point. Whenever the shell is closed, I have to pump it really fast to keep pressure in. Otherwise, it just escapes out the barrel. If the shell is open, it pumps perfectly fine. I've tried spraying silicone spray in it and no luck.
For reference, I'm using a magstrike pump.
Posted Image
  • 0
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?

Tony Stark: Absolutely ridiculous. I don't paint.

#2 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 22 February 2010 - 01:50 PM

Your trigger is too far back while in the resting position. It's holding the valve open even when the trigger isn't depressed.

Edited by Ryan201821, 22 February 2010 - 03:26 PM.

  • 0

#3 soccerbeast003

soccerbeast003

    Member

  • Members
  • 206 posts

Posted 22 February 2010 - 05:39 PM

Your trigger is too far back while in the resting position. It's holding the valve open even when the trigger isn't depressed.

Thank you, I loosened some screws and now it fires fine.
  • 0
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?

Tony Stark: Absolutely ridiculous. I don't paint.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users