Ideal tools
• Philips screw driver
• Flat head screwdriver
• Pipe cutter
• Box cutter or other blade
Materials
• Sonic Baz
• ½ cpvc coupler
• ½ pvc coupler
• Glue: Krazy or goop are my recommendations
Do this with this.
Pry off this with this.
Shave these a bit with this.
Apply ½ cpvc couplers, should be a very snug fit. Use your choice of glue.
Jam your ½ PVC right on top of the ½ cpvc, apply your choice of glue (but hot glue makes kittens die).
Re-shell. No need to cut down the shell, just tighten the screws and you are set.
3-round inline, simple pvc connected to cpvc. Very reliable, effects range very little. Grab stand alone pcv or just flip it around for megas.
With PJ, surrounded by my bounty from the St. Paul Late Fall war where this baby proved it’s winter worthiness.
Why this mod
• Can be done in 10 minutes for $10 (or there abouts)
• Does not make a mess in your living room cuz no dremmeling…or real cutting at all save for the barrel. Ideal for those of us who’s garages are friggin freezing right now.
• Great for last minute, night-before, or N.I.B. wars.
• Reliable blaster: used this as a primary in three wars in all the climates MN has to offer and have not had one problem.
• Decent range: 60’s for micros with 3-shot in-line, same about for single mega.
• Versatility in ammo: micros and megas easily switched between.
• Light weight, easy to carry, easy to run with.
Key words: simple, easy, quick, first mod, no mess, sonic bazooka, sonic baz, SB.
