Jump to content


Photo

How To: Cpvc Clipped Breech


9 replies to this topic

#1 soccerbeast003

soccerbeast003

    Member

  • Members
  • 206 posts
  • Location:Midland, North Carolina

Posted 01 February 2010 - 01:01 AM

Hello all. I have stumbled upon a new idea.

Materials:
Cpvc
About an inch and a half of a titan pump tube
3/4 Cpvc
The bottom stock of a longshot stock.
Patience

First, cut a breech slot as wide as the clip, and hammer in your stub of Titan pump tube to the 3/4 cpvc. The breech slot bottom where to dart falls on needs to be 1/4 of an inch. Note: The bottom part of the slot here is NOT 1/4 inch, but it needs to be.
Posted Image
Posted Image
Here's what it should look like:
Posted Image
Then cut your stock like so:
Posted Image
Posted Image
Next, glue your Stock Butt on your cut breech. Note: when the clip is in, it needs to line up with the bottom of the slot cut
Posted Image
And wrap your cpvc in electrical tape to have snug/loose fit in the 3/4 cpvc.
You can also attach a string so whenever you open your breech your barrel does not fall out.
And now you can attach it on any cpvc coupler!
Video: Posted Image
Update: The clip fits the drum mag and it is very sturdy, but bulky.
Posted Image
Posted Image
Questions or Comments? Anything unclear?

Edited by soccerbeast003, 01 February 2010 - 04:57 PM.

  • 0
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?

Tony Stark: Absolutely ridiculous. I don't paint.

#2 HOTH

HOTH

    Member

  • DO NOT TRADE
  • 557 posts
  • Location:UC Berkeley (Cal)
  • State:California
  • Country:United States

Posted 01 February 2010 - 01:31 AM

Never though of using the bottom a stock that hold clips for a breech. Nice idea.
  • 0
My YouTube

Solved the Rubik's Cube in 46 seconds

"Nobody understands quantum mechanics" - Richard Feynman

#3 pjotrkuh

pjotrkuh

    Member

  • Members
  • 259 posts
  • Location:'S-Hertogenbosch, The Netherlands
  • Country:Netherlands

Posted 01 February 2010 - 09:18 AM

Nice idea, but with what did you cut the stock? some old nail clipper? :blink:
  • 0
When the shit hits the fan, you'd better wear a rain coat.....

#4 soccerbeast003

soccerbeast003

    Member

  • Members
  • 206 posts
  • Location:Midland, North Carolina

Posted 01 February 2010 - 10:13 AM

Nice idea, but with what did you cut the stock? some old nail clipper? :blink:

Haha, ya I'm not all that focused on the looks and I'm a very impatient modder haha. I used something close to nail clippers but not exactly nail clippers haha.
  • 0
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?

Tony Stark: Absolutely ridiculous. I don't paint.

#5 Eh Watt

Eh Watt

    Member

  • Members
  • 265 posts
  • Location:St. Paul, MN

Posted 01 February 2010 - 11:39 AM

I like it. Your SNAP + Airsoft Stock looks quite good.
  • 0
John Hancock

#6 Ner Commando

Ner Commando

    Member

  • Members
  • 118 posts
  • Location:New Jersey
  • State:New Jersey
  • Country:United States

Posted 01 February 2010 - 03:27 PM

Could a drum turret fit in there?
  • 0

#7 HOTH

HOTH

    Member

  • DO NOT TRADE
  • 557 posts
  • Location:UC Berkeley (Cal)
  • State:California
  • Country:United States

Posted 01 February 2010 - 03:47 PM

Could a drum turret fit in there?

Why wouldn't it? Of course it will.
  • 0
My YouTube

Solved the Rubik's Cube in 46 seconds

"Nobody understands quantum mechanics" - Richard Feynman

#8 death by cheez

death by cheez

    Member

  • Members
  • 758 posts
  • Location:Elkhart, IN

Posted 01 February 2010 - 03:56 PM

Would those giant nail clippers have been... wire cutters? Because that's what I use since I broke all of my dremel cutting wheels.
  • 0

http://fairview.dead...eadfrontier.com

Great game, zombie apocalypse MMORPG. I'm acer34p3r on there.

#9 soccerbeast003

soccerbeast003

    Member

  • Members
  • 206 posts
  • Location:Midland, North Carolina

Posted 01 February 2010 - 04:53 PM

Well, sort of. They are like jewelry cutting clipper thing haha.
Also, new pictures added.

Edited by soccerbeast003, 01 February 2010 - 04:58 PM.

  • 0
Christine Everheart: You've been called the Da Vinci of our time. What do you say to that?

Tony Stark: Absolutely ridiculous. I don't paint.

#10 death by cheez

death by cheez

    Member

  • Members
  • 758 posts
  • Location:Elkhart, IN

Posted 01 February 2010 - 06:16 PM

Well then I shall try this, I need to clip a 3k....
  • 0

http://fairview.dead...eadfrontier.com

Great game, zombie apocalypse MMORPG. I'm acer34p3r on there.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users