6 replies to this topic

[ablahblah]

Many people are saying to get the Longshot Air restrictor out, you gotta get out the spring mechanism and rip out the little circular piece in the barrel to get the piece out. I took apart my Longshot. I carefully disassembled the firing mechanism and removed the launching tube. I got the big spring out. Problem is, the circular piece inside shielding the air restrictor is glued in to the sides . Pliers, using a screwdriver to break the glue, nothing's working. Now what??

Oh yes, this is my first post ^^

(To clear things up, the circular piece I'm referring to is the piece inside the dart launching mechanism that should come out right after the spring.)

[Kid Flash]

I drill through mine... You're referring to the piece that stops the plunger head right?

[Whisper101]

Like Flash said:

a 1/2" drill bit will do you fine in the exact place that he's talking about. Alternatively, if you have a VERY long 1/2" bit, you could go strait through the front where the dart is loaded.

Hope this helps,

Whisper...

[puky]

Someone else had a good method for this, though I can't find it or remember if it was for the Longshot or Raider. Regardless: pipe cutters

http://www.usinenouv...000051104-4.jpg
http://www.trygrs.co...pipe-cutter.jpg

These babies give you a nice clean cut all around that glued seam so you don't end up trashing your guns internals

[umpshaplapa]

Are there 3 pieces of plastic coming out of the center piece, connecting it to the outer ring? If you snip those pieces with pliers or anything else the restrictor should come out easy.

[CaptainSlug]

Use the Search function and the Modification Directory.