Is it possible to get the end cap on the ls scope off? I've tried prying it off with a screw driver to no avail.
Longshot Scope Question
Started by Eclipse, Nov 22 2009 11:27 PM
6 replies to this topic
#2
xbox180
-
- Members
- 231 posts
Member
Posted 23 November 2009 - 12:52 AM
Yes, take a dremel and go along the edges, then it'll look just as clean.
"Congrats on Buy a Peice of Plastic thats most likely older than you, for half- a grand, your awesome man." Nerf Monkey
My Webpage MY Youtube
My Webpage MY Youtube
#3
dog9
-
- Members
- 115 posts
Member
Posted 23 November 2009 - 08:25 PM
My friend just pulled his off.
Nerf On!!!!!
#4
ilzot
-
- Members
- 286 posts
Member
Posted 23 November 2009 - 09:54 PM
Stick a screwdriver between the cap and body, and pop it until it starts to turn a brighter color (stress)
Work it like this all the way around, and keep pulling, and it should pop off with time and a little elbow grease.
Work it like this all the way around, and keep pulling, and it should pop off with time and a little elbow grease.
QUOTE(Vinnie D. @ Feb 1 2010, 05:28 AM) 
... to be able to get a better burst or sustained fire, rather than blowing the whole load at once.
#5
Kid Flash
-
- Members
- 1,985 posts
Member
Posted 24 November 2009 - 08:47 PM
Dip it in some almost boiling water. It will destroy the bond between the plastics and the glue. It'll pop off much easier.
#6
Eclipse
-
- Members
- 34 posts
Member
Posted 25 November 2009 - 02:14 AM
Dip it in some almost boiling water. It will destroy the bond between the plastics and the glue. It'll pop off much easier.
is there any possibility that this will turn the lense opaque?
#7
pjotrkuh
-
- Members
- 259 posts
Member
Posted 25 November 2009 - 09:47 AM
Dip it in some almost boiling water. It will destroy the bond between the plastics and the glue. It'll pop off much easier.
is there any possibility that this will turn the lense opaque?
It should not, boiling water is not agressive on plastic.
When the shit hits the fan, you'd better wear a rain coat.....
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
