7 replies to this topic

[Raymmond]

I have been seen recent videos on YouTube and people are saying that you can use crayolabarrels to act like cpvc. And I want I know how I can make my own coupler for it. Any solutions?

[k9turrent]

• Cut the back off the marker
• Pull the tip out of marker
• Use the cap of the marker, cut the section that securs to the marker off

The cap acts as a coupler, , use multiple markers to act as a speedloader

[Ubermensch]

I wouldn't compare crayolas to cpvc. Crayolas a have a significantly looser dart fit.

[JATDO]

Crayolas sometimes fit snugly in sch40 PVC
use it as a coupler

[jerm78]

I use markers in 1/2 inch pvc couplers. I just wrap the end of the marker with e-tape till it fits snug in the coupler. I use Rose Art markers, no tabs on the inside and they fit Nerf darts perfect but stefans fit loose.

[Banshee]

Wrap it in e-tape and use whatever you want as a coupler really. And marker barrels are slightly cone shaped and have a looser fit towards the end.

Edited by Banshee, 17 November 2009 - 11:56 PM.

[Raymmond]

Thanks people, I really appreciated your help

[Brotoslava]

When modding guns early on, I came up with the crayola coupler system where I would gut the back off the marker cap and attach it to the plunger tube and leave the plastic part near the felt on and it would snap in to the cap and act like a coupler.